콘텐츠로 건너뛰기
Merck
모든 사진(1)

Key Documents

910635

Sigma-Aldrich

IDT-2Br

≥99%

동의어(들):

5,5′-[[4,4,9,9-Tetrakis(4-hexylphenyl)-4,9-dihydro-s-indaceno[1,2-b:5,6-b′]dithiophene-2,7-diyl]bis(2,1,3-benzothiadiazole-7,4-diylmethylidyne)]bis[3-ethyl-2-thioxo-4-thiazolidinone], IDT-BT-R

로그인조직 및 계약 가격 보기


About This Item

실험식(Hill 표기법):
C88H88N6O2S8
CAS Number:
Molecular Weight:
1518.20
UNSPSC 코드:
12352101
NACRES:
NA.23

설명

Band gap: 1.83 eV

분석

≥99%

형태

solid

분자량

1518.20 g/mol

색상

dark

solubility

chloroform: soluble

오비탈 에너지

HOMO -5.52 eV 
LUMO -3.69 eV 

일반 설명

Non-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be designed and readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts.Recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 15% in a single junction cell, and >17% for a tandem cell, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs.

애플리케이션

IDT-2BR is a medium-high bandgap non fullerene acceptors (NFAs) which can be utilized as a p-dopant in the fabrication of p-type organic semiconductors for OFETs (Organic Field-Effect Transistors). IDT-2Br is used as a halogen-based flame retardant additive in the production of printed circuit boards (PCBs). It helps improve the fire resistance of PCB materials, ensuring their safety during use. It can be incorporated into the polymer or small molecule-based photoactive materials, contributing to the absorption of light and facilitating charge generation in the OPV device. Its presence in the active layer can help enhance the light absorption and power conversion efficiency of the solar cell.
IDT-2BR is a medium-high bandgap nonfullerene acceptors (NFAs). It was reported that IDT-2BR could produce a high power conversion efficiency (PCE) of over 10% when used with low-bandgap p-type polymer PTB7-Th (Product No. 794333). A prominent feature of this blend is the very small energy loss (< 0.6 eV) in the cell, which allows for a very high open circuit voltages in the device (> 1 V).
Ternary blend organic solar cells (OSCs) with photoresponses beyond 1000 nm can be fabricated using PTB7-Th as donor and ultralow-bandgap F8IC and medium-high bandgap IDT-2BR as NFAs. A PCE of 12.1% has been achieved by such a ternary device with 20% IDT-2BR content in acceptors. In this work, IDT-2BR was found to contribute simultanously to the improvement of the open-circuit voltage (VOC), short-circuit (JSC) and fill factor (FF) of the PTB7-Th/F8IC blend, due to smaller energy offset for charge separation, suppressed charge recombination, and imporved light absorption. Improved packing due to the coexsitence of F8IC and IDT-2BR leads to higher mobilities and more balanced charge transport, which contribute to the improved FF as well.
Additionaly, blends with IDT-2BR have been found to be thermally stable at 150 Celsius.
A ternary blend using both IDT-2BR and fullerene based acceptor: PC71BM (Product No. 684465) has also reached a PCE over 12%.

Storage Class Code

13 - Non Combustible Solids

WGK

WGK 3

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable


시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

High-performance ternary organic solar cells with photoresponses beyond 1000 nm
X Peiyao, et al,.
Journal of Material Chemistry A, 6(47), 24210-24215 (2018)
Efficient device engineering for inverted non-fullerene organic solar cells with low energy loss
Xiao J, et al.
Journal of Material Chemistry C, 6 (16), 4457-4463 (2018)
Min Kim et al.
ACS applied materials & interfaces, 10(30), 25570-25579 (2018-07-10)
Ternary blending is an effective strategy for broadening the absorption range of the active layer in bulk heterojunction polymer solar cells and for constructing an efficient cascade energy landscape at the donor/acceptor interface to achieve high efficiencies. In this study
Pei Cheng et al.
Advanced materials (Deerfield Beach, Fla.), 29(11) (2017-01-20)
A new, easy, and efficient approach is reported to enhance the driving force for charge transfer, break tradeoff between open-circuit voltage and short-circuit current, and simultaneously achieve very small energy loss (0.55 eV), very high open-circuit voltage (>1 V), and

문서

Professor Chen (Nankai University, China) and his team explain the strategies behind their recent record-breaking organic solar cells, reaching a power conversion efficiency of 17.3%.

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.