추천 제품
형태
liquid
제조업체/상표
Chemicon®
기술
ELISA: suitable
λmax
450 nm
배송 상태
wet ice
일반 설명
TMB, (3,3′,5,5′-tetramethybenzidine) has been shown to be a safe-sensitive substrate for the assay of HRP. Initially, in the presence of HRP and hydrogen peroxide, a one-electron oxidation product is formed. This compound, a cation free radical, is blue in color with an adsorption maximum of 653 nm. Further reaction with HRP/H2O2 or acidification of the radical with acid yields the diimine terminal oxidation product adsorbing light at 450 nm. The extinction coefficient of the radical (E653nm=3.9 x 104 mol-1 cm-1) and diimine (E450nm=5.9 x 104 mol-1 cm-1) provide a remarkably sensitive system for the assay of HRP and HRP labeled probes. ES001 is a single component reagent stable at room temperature and not sensitive to normal laboratory light. It is optimized with respect to TMB and hydrogen peroxide concentrations and yields a linear response with the concentrations of HRP usually employed in immunological assays.
애플리케이션
METHOD SYNOPSIS:
After completion of analyte binding to a solid phase and reaction with a HRP labeled probe, ES001 is added. Oxidation of TMB produces a blue reaction product that is measured at 650 nm. The color formation as a function of time can be recorded or the reaction stopped with sodium fluoride after a fixed interval. Increased sensitivity can be achieved by converting the blue radical to the diimine by addition of acid. The resulting yellow color is measured immediately at 450 nm.
SAMPLE PROCEDURE
1. Complete all required incubations with antibodies, probes, HRP labeled reagents.
2. Wash plate at least 4 times with PBS or Tris buffered saline containing 0.1% Tween-20.
3. After the final wash, shake and blot all residual buffer from plate wells.
4. Add 0.1 mL of ES001 (TMBE Solution) to appropriate wells and incubate 5-30 minutes.
Note: The reaction time will depend upon the activity of the HRP probe. If color develops too briskly, zero order kinetics will not prevail. Dilution of the probe, antibody or HRP labeled reagent may be required.
5. The reaction can be monitored as a function of time for kinetic assays or stopped with 0.1 mL of 0.1% sodium fluoride and read at 650 nm.
6. If the procedure demands conversion to the yellow diimine, add 0.1 mL of either acid described in the reagent section above and record the absorbance within 5 minutes.
Variations of time, reagent volume and temperature require standardization by the user.
After completion of analyte binding to a solid phase and reaction with a HRP labeled probe, ES001 is added. Oxidation of TMB produces a blue reaction product that is measured at 650 nm. The color formation as a function of time can be recorded or the reaction stopped with sodium fluoride after a fixed interval. Increased sensitivity can be achieved by converting the blue radical to the diimine by addition of acid. The resulting yellow color is measured immediately at 450 nm.
SAMPLE PROCEDURE
1. Complete all required incubations with antibodies, probes, HRP labeled reagents.
2. Wash plate at least 4 times with PBS or Tris buffered saline containing 0.1% Tween-20.
3. After the final wash, shake and blot all residual buffer from plate wells.
4. Add 0.1 mL of ES001 (TMBE Solution) to appropriate wells and incubate 5-30 minutes.
Note: The reaction time will depend upon the activity of the HRP probe. If color develops too briskly, zero order kinetics will not prevail. Dilution of the probe, antibody or HRP labeled reagent may be required.
5. The reaction can be monitored as a function of time for kinetic assays or stopped with 0.1 mL of 0.1% sodium fluoride and read at 650 nm.
6. If the procedure demands conversion to the yellow diimine, add 0.1 mL of either acid described in the reagent section above and record the absorbance within 5 minutes.
Variations of time, reagent volume and temperature require standardization by the user.
물리적 형태
Color Code: Yellow
REAGENT PROVIDED:
Liquid solution containing TMB, 1.25 mMol/L and Hydrogen Peroxide, 2.21 mMol/L and less than 1% dimethyl sulfoxide in a 0.08 Mol/L) acetate buffer at pH 4.9. Also contains non-toxic proprietary stabilizers.
Materials Required:
Reagents Required for Stopping the Reaction, But Not Provided
A. Sodium fluoride, 0.1% for stopping the reaction and preserving blue chromogen. Prepare by dissolving 1 g of sodium fluoride in 1 liter of reagent grade water. Observe all precautions on label for use of sodium fluoride.
B. Acid for stopping the reaction and converting the blue radical to the yellow diimine. Either 0.5 Mol/L sulfuric acid or 0.25 Mol/L hydrochloric acid may be used. THE ABSORBANCE MUST BE OBTAINED WITHIN 5 MINUTES AFTER ADDING THE ACID.
Note: Reagent grade water must contain less than 10-7 Mol/L of iron or copper salts otherwise unreacted TMB will be converted non-enzymatically to the diimine.
Liquid solution containing TMB, 1.25 mMol/L and Hydrogen Peroxide, 2.21 mMol/L and less than 1% dimethyl sulfoxide in a 0.08 Mol/L) acetate buffer at pH 4.9. Also contains non-toxic proprietary stabilizers.
Materials Required:
Reagents Required for Stopping the Reaction, But Not Provided
A. Sodium fluoride, 0.1% for stopping the reaction and preserving blue chromogen. Prepare by dissolving 1 g of sodium fluoride in 1 liter of reagent grade water. Observe all precautions on label for use of sodium fluoride.
B. Acid for stopping the reaction and converting the blue radical to the yellow diimine. Either 0.5 Mol/L sulfuric acid or 0.25 Mol/L hydrochloric acid may be used. THE ABSORBANCE MUST BE OBTAINED WITHIN 5 MINUTES AFTER ADDING THE ACID.
Note: Reagent grade water must contain less than 10-7 Mol/L of iron or copper salts otherwise unreacted TMB will be converted non-enzymatically to the diimine.
저장 및 안정성
Maintain at room temperature for up to six months. For long term storage, up to twelve months, maintain at 2-8°C. Protect from exposure to direct sunlight. Discard if solution is blue or turbid.
법적 정보
CHEMICON is a registered trademark of Merck KGaA, Darmstadt, Germany
면책조항
Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.
Storage Class Code
12 - Non Combustible Liquids
WGK
WGK 2
Flash Point (°F)
Not applicable
Flash Point (°C)
Not applicable
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
이미 열람한 고객
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.