CLS431431

Corning^® square polycarbonate storage bottle

square clear polycarbonate, sterile, bottle capacity 250 mL, cap (plug seal), case of 24

• 동의어(들): polycarbonate containers, polycarbonate plastic containers, polycarbonate storage containers
• UNSPSC 코드: 41121800
• NACRES: NA.75

속성

• material: cap (plug seal); polycarbonate bottle (square); screw top polypropylene cap; square clear polycarbonate
• 무균: sterile; sterile
• 특징: cap; disposable; graduations 50 mL
• 포장: case of 24; case of 24
• 제조업체/상표: Corning 431431
• 재고 정보: not available in Canada
• 보틀(bottle) 용량: 250 mL
• bottle neck diam.: ~44 mm
• 피팅: GL 45 thread

설명

일반 설명

Corning square polycarbonate storage bottles are easier to handle, require less space (13-20%) on the shelf or in the autoclave and are ideal for mixing, sampling and storage.

Caution: These square polycarbonate storage bottles should NOT be used with bottle top filter units, or in other applications involving vacuum pressure, as breakage may occur. DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.

• Strong polycarbonate bottles are more break resistant than other glass or plastic bottles.
• Use a linerless, 45mm one-piece autoclavable orange GL45 threaded polypropylene plug seal cap.
• Screened white enamel graduations are easier to see than molded graduations
• Sterilized by gamma radiation
• Large white marking spot for easier identification
• Bottles can be autoclaved once at 121ºC and 15psi. Repeated autoclaving weakens polycarbonate and is not recommended.
• Optional reusable caps with silicone septa (SIAL Cat. Nos. CLS139545HTSC, CLS139545TS) for syringe sampling or introduction of reagents are available for these caps.

Note: Most GL45 threaded caps designed for glass storage bottles use a different sealing design and will not give a secure seal if used on these plastic bottles unless they have a rubber liner.

법적 정보

Corning is a registered trademark of Corning, Inc.