1.00020
Acetone
for liquid chromatography LiChrosolv®
Synonym(s):
Dimethyl ketone, Propanone, 2-Propanone
About This Item
Recommended Products
grade
HPLC grade
isocratic
Quality Level
vapor density
2 (vs air)
vapor pressure
184 mmHg ( 20 °C)
product line
LiChrosolv®
assay
≥99.8% (GC)
form
liquid
autoignition temp.
465 °C (DIN 51794)
potency
5800 mg/kg LD50, oral (Rat)
20000 mg/kg LD50, skin (Rabbit)
expl. lim.
13.2 %
technique(s)
HPLC: suitable
impurities
≤0.0002 meq/g Acidity
≤0.0002 meq/g Alkalinity
≤0.05% Water
evapn. residue
≤2.0 mg/L
transmittance
335 nm, ≥50%
340 nm, ≥80%
350 nm, ≥98%
refractive index
n20/D 1.359 (lit.)
pH
5-6 (20 °C, 395 g/L in H2O)
capacity
1000 g/kg water absorbing capacity
bp
56 °C/760 mmHg (lit.)
mp
−94 °C (lit.)
transition temp
flash point <-20 °C
density
0.791 g/mL at 25 °C (lit.)
format
neat
storage temp.
2-30°C
SMILES string
CC(C)=O
InChI
1S/C3H6O/c1-3(2)4/h1-2H3
InChI key
CSCPPACGZOOCGX-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
General description
Application
Reported for use in LC–MS/MS investigations of:
- blood plasma and serum samples fractionated on several chromatography sorbents
- peptides in animal biological samples
Features and Benefits
- suitability tested and specified for UHPLC-MS and UHPLC-UV: for analytical flexibility
- specified quality in positive and negative in positive and negative electrospray ionization (ESI) and atmospheric-pressure chemical ionization-mass spectrometry (APCI-MS) for lowest detection limits and confidence in analyses for all important MS modes (test 1)
—ESI/APCI (-) < 10 ppb
- lowest impurity profile: for interference-free baselines (test 2)
- microfiltered through 0.2 μm filter (test 3) to provide:
—reduced risk of column clogging
- packed in borosilicate glass bottles for minimized metal ion contaminations
- lowest levels of trace metal impurities for a minimum metal ion adduct formation
- lowest level of polyethylene glycol (PEG) impurities in UHPLC-MS solvent lineup (PEG S/N signal-to-noise-ratio < 50)
Preparation Note
Other Notes
Legal Information
signalword
Danger
hcodes
Hazard Classifications
Eye Irrit. 2 - Flam. Liq. 2 - STOT SE 3
target_organs
Respiratory system
supp_hazards
Storage Class
3 - Flammable liquids
wgk_germany
WGK 1
flash_point_f
1.4 °F - closed cup
flash_point_c
-17.0 °C - closed cup
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
Articles
This application note describes the HPTLC-based identification of fixed oils using octadecyl silyl silica gel as the coating substance, following USP 43 NF 38 monograph method containing USP general chapter <202>.
Simultaneous analysis of ascorbic acid and dehydroascorbic acid in various food samples by High Performance Thin Layer Chromatography (HPTLC).
An accurate and precise HPLC-PDA measurement of 32 cannabinoids and 2 cannflavins in hemp samples using a single extraction in less than 32 minutes.
Protocols
Qualitative Thin Layer Chromatography Analysis of Flavonoids and Quantification of Terpene Lactones in Ginkgo Biloba Extracts and Tablets
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service