Skip to Content
MilliporeSigma
  • Direct metabolomics for plant cells by live single-cell mass spectrometry.

Direct metabolomics for plant cells by live single-cell mass spectrometry.

Nature protocols (2015-08-28)
Takashi Fujii, Shuichi Matsuda, Mónica Lorenzo Tejedor, Tsuyoshi Esaki, Iwao Sakane, Hajime Mizuno, Naohiro Tsuyama, Tsutomu Masujima
ABSTRACT

Live single-cell mass spectrometry (live MS) provides a mass spectrum that shows thousands of metabolite peaks from a single live plant cell within minutes. By using an optical microscope, a cell is chosen for analysis and a metal-coated nanospray microcapillary tip is used to remove the cell's contents. After adding a microliter of ionization solvent to the opposite end of the tip, the trapped contents are directly fed into the mass spectrometer by applying a high voltage between the tip and the inlet port of the spectrometer to induce nanospray ionization. Proteins are not detected because of insufficient sensitivity. Metabolite peaks are identified by exact mass or tandem mass spectrometry (MS/MS) analysis, and isomers can be separated by combining live MS with ion-mobility separation. By using this approach, spectra can be acquired in 10 min. In combination with metabolic maps and/or molecular databases, the data can be annotated into metabolic pathways; the data analysis takes 30 min to 4 h, depending on the MS/MS data availability from databases. This method enables the analysis of a number of metabolites from a single cell with rapid sampling at sub-attomolar-level sensitivity.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Acetonitrile solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Sigma-Aldrich
Methanol, suitable for HPLC
Sigma-Aldrich
Methanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Water, BioPerformance Certified
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, NMR reference standard
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
E-Toxate Water, endotoxin, free
Sigma-Aldrich
Water, sterile-filtered, BioReagent, suitable for cell culture
Sigma-Aldrich
Water, PCR Reagent
Sigma-Aldrich
Water, Nuclease-Free Water, for Molecular Biology
Sigma-Aldrich
Water, for molecular biology, sterile filtered
Sigma-Aldrich
Water, for cell biology, sterile ultrafiltered
Sigma-Aldrich
Water, deuterium-depleted, ≤1 ppm (Deuterium oxide)
Sigma-Aldrich
Methanol, anhydrous, 99.8%
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, 99.93%
Sigma-Aldrich
Water, for embryo transfer, sterile-filtered, BioXtra, suitable for mouse embryo cell culture
Sigma-Aldrich
Methanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, for residue analysis
Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Perchloric acid, 0.1 M
Sigma-Aldrich
Acetonitrile, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Acetonitrile, for residue analysis, JIS 5000
Sigma-Aldrich
Acetonitrile, ≥99.8%, for residue analysis, JIS 300
Sigma-Aldrich
Acetonitrile, ≥99.8%, for residue analysis, JIS 1000
Sigma-Aldrich
Acetonitrile, ≥99.8%, suitable for HPLC
Sigma-Aldrich
Acetonitrile, SAJ first grade, ≥99.0%