Skip to Content
Merck
All Photos(2)

Key Documents

View All Documentation

541443

Sigma-Aldrich

Poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene]

average Mn 40,000-70,000

Synonym(s):

MEH-PPV

Sign Into View Organizational & Contract Pricing
All Photos(2)

About This Item

Linear Formula:
(C18H28O2)n
CAS Number:
138184-36-8
MDL number:
MFCD03093943
UNSPSC Code:
12352103
NACRES:
NA.23

description

Band gap: 2.3 eV

Quality Level

100

mol wt

average Mn 40,000-70,000

fluorescence

λex 493 nm; λem 554 nm in toluene

Orbital energy

HOMO -5.3 eV 
LUMO -3 eV 

OLED Device Performance

ITO/PEDOT:PSS/MEH-PPV/Al

  • Color: orange-red
  • Max. Luminance: 220 Cd/m2
  • Max. EQE: 0.3 %
  • Turn-On Voltage: 3.8 V

ITO/PEDOT:PSS/MEH-PPV/PBO/Al
  • Color: orange-red
  • Max. Luminance: 970 Cd/m2
  • Max. EQE: 1.9 %
  • Turn-On Voltage: 2.9 V

ITO/PEDOT:PSS/MEH-PPV/PBZT/Al
  • Color: orange-red
  • Max. Luminance: 1400 Cd/m2
  • Max. EQE: 2.5 %
  • Turn-On Voltage: 2.8 V

OPV Device Performance

ITO/MEH-PPV/BBL/Al

  • Short-circuit current density (Jsc): 1.98 mA/cm2
  • Open-circuit voltage (Voc): 0.93 V
  • Fill Factor (FF): 0.47
  • Power Conversion Efficiency (PCE): 1.1 %

ITO/MEH-PPV:PC61BM(1:4)/Ca
  • Short-circuit current density (Jsc): 2 mA/cm2
  • Open-circuit voltage (Voc): 0.8 V
  • Fill Factor (FF): 0.25
  • Power Conversion Efficiency (PCE): 1.5 %

Mw/Mn

~6

storage temp.

2-8°C

Related Categories

General description

MEH-PPV is a conducting organic semiconductor which has low molecular weight and hydrophobic characteristics. It is a poly(phenylenevinylene) (PPV) derivative and a conjugating polymer with highest occupied molecular orbital (HOMO) below the fermi level of gold.
Light-emitting conjugated polymer.

Application

Organic Semiconductor Laser Materials
Conducting polymer in solar cells and carbon nanotube OLEDs. Useful in producing bright and efficient white polymeric light emitting diodes.
Filter before application.
MEH-PPV can form a nanocomposite with carbon nanotubes (CNTs) by spin coating that can be used for H2S gas sensors. It can also be used as a conducting polymer which results in the formation of a low-cost dopant free hole transporting material (HTM) for the fabrication of perovskite solar cells with a power efficiency of 9.65%. MEH-PPV can be blended with PCPDTBT for use as a sensitizer for dye sensitized photo sensors (DSPS).

Storage Class Code

11 - Combustible Solids

WGK

WGK 3

Flash Point(F)

Not applicable

Flash Point(C)

Not applicable

Personal Protective Equipment

dust mask type N95 (US), Eyeshields, Gloves

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Find documentation for the products that you have recently purchased in the Document Library.

Visit the Document Library

A gold/organic semiconductor diode for ppm-level humidity sensing.
Hossein-Babaei F and Shabani P
Sensors and Actuators B, Chemical, 205, 143-150 (2014)
Selective metal-vapor deposition on solvent evaporated polymer surfaces.
Yamaguchi K and Tsujioka T
Thin Solid Films, 597, 220-225 (2015)
Binary blend based dye sensitized photo sensor using PCPDTBT and MEH-PPV composite as a light sensitizer.
Qadir KW, et al.
Synthetic Metals, 210(1), 392-397 (2015)
Photoelectrochemical properties of ZnO nanocrystals/MEH-PPV composite: The effects of nanocrystals synthetic route, film deposition and electrolyte composition.
Petrella A, et al.
Thin Solid Films, 595, 157-163 (2015)
Enhancement of MEH-PPV: CNT for H2S gas sensor.
Ibrahim IM, et al.
Journal of Physics. Conference Series, 1032(1), 012003-012003 (2018)
View All Related Papers

Articles

PCBM-Based n-Type Semiconductors

PCBM-based n-type semiconductors - Find p- and n-type organic semiconductors available with PCBM library & properties.

Light-emitting Polymers

LEPs enable a wide range of important applications including sensors, flexible LED displays and lighting devices, optical pump lasers, and potentially polymer diode lasers.

Mesoporous Materials Synthesis

Mesoporous materials self-assemble from sol-gel precursors and amphiphiles, forming versatile structures for various applications.

High-Performance Semiconductor Polymers Based on Diketopyrrolopyrrole and Thienothiophene

The development of high-performance conjugated organic molecules and polymers has received widespread attention in industrial and academic research.

See All

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service