202304
Poly(propylene glycol)
average Mn ~425
Synonym(s):
PPG, Poly(propylene oxide)
Sign Into View Organizational & Contract Pricing
All Photos(1)
About This Item
Linear Formula:
H[OCH(CH3)CH2]nOH
CAS Number:
MDL number:
UNSPSC Code:
12162002
PubChem Substance ID:
NACRES:
NA.23
vapor pressure:
<0.01 mmHg ( 20 °C)
Recommended Products
vapor density
>1 (vs air)
Quality Level
vapor pressure
<0.01 mmHg ( 20 °C)
mol wt
average Mn ~425
contains
130-190 ppm proprietary phenolic antioxidant
refractive index
n20/D 1.447
viscosity
80 cSt(25 °C)(lit.)
hydroxyl value
263 mg KOH/g
solubility
water: miscible (completely)
density
1.004 g/mL at 25 °C
SMILES string
CC(O)CO
InChI
1S/C6H14O3/c1-5(8)4-9-6(2)3-7/h5-8H,3-4H2,1-2H3
InChI key
DUFKCOQISQKSAV-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
Related Categories
Application
Poly(propylene glycol) can be used:
- As a plasticizer as it does not crystalize, has a low glass transition temperature, and is biocompatible. For example, it can be used in the plasticization of polylactic acid.
- To prepare the aqueous biphasic system for the recovery of ectoine from Halomonas salina cells.
- To study the virtual transition from supramolecular polymer(PPG) toconventional polymer(PPO).
Storage Class Code
10 - Combustible liquids
WGK
WGK 1
Flash Point(F)
445.0 °F - closed cup
Flash Point(C)
229.44 °C - closed cup
Personal Protective Equipment
dust mask type N95 (US), Eyeshields, Gloves
Choose from one of the most recent versions:
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Customers Also Viewed
James E Hudson et al.
Tissue engineering. Part A, 17(17-18), 2279-2289 (2011-05-06)
Tissue engineering approaches are currently being investigated for the restoration of myocardial function in heart failure patients, most commonly by combining cells with a substrate to form myocardial-like constructs (MCs). The final properties of these constructs are dependant on the
Omnidirectional printing of 3D microvascular networks.
Willie Wu et al.
Advanced materials (Deerfield Beach, Fla.), 23(24), H178-H183 (2011-03-26)
Elisa Campos et al.
Colloids and surfaces. B, Biointerfaces, 88(1), 477-482 (2011-08-09)
Bi-soft segmented poly(ester urethane urea) microparticles were prepared and characterized aiming a biomedical application. Two different formulations were developed, using poly(propylene glycol), tolylene 2,4-diisocyanate terminated pre-polymer (TDI) and poly(propylene oxide)-based tri-isocyanated terminated pre-polymer (TI). A second soft segment was included
Daimei Chen et al.
Journal of hazardous materials, 235-236, 186-193 (2012-08-14)
TiO(2) pillared clay materials were prepared by montmorillonite (Mt) and acidic solutions of hydrolyzed Ti alkoxides in the presence of high-molecular-weight polyoxypropylene (POP)-backboned di-quaternary salts (POP). The as-prepared materials were characterized by means of XRD, FTIR, TG-DTA, XRF, specific surface
Chih Hao Chang et al.
Bio-medical materials and engineering, 22(6), 373-382 (2012-11-02)
Segmented polyurethane (SPU) materials based on different soft-segment component (PPG, PTMO and PBA) and various length of soft-segment (molecular weight of PBA: 500, 700 and 1000) were synthesized in this research. The soft-segment components were synthesized from polyether-polyols (PPG and
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service