MilliporeSigma
All Photos(1)

1.09016

Sigma-Aldrich

Neo-Mount

anhydrous mounting medium for microscopy

Quality Level

refractive index

n20/D 1.4171-1.4650

kinematic viscosity

305-427 cSt(20 °C)

transition temp

flash point 19.5 °C

density

0.819-0.822 g/cm3 at 20 °C

application(s)

diagnostic assay manufacturing
hematology
histology

storage temp.

15-25°C

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
C93681.079611.07960
Neo-Mount™ anhydrous mounting medium for microscopy

Sigma-Aldrich

1.09016

Neo-Mount

Sigma-Aldrich

Sigma-Aldrich

C9368

CC/Mount

Entellan™ new rapid mounting medium for microscopy

Sigma-Aldrich

1.07961

Entellan new

Entellan™ rapid mounting medium for microscopy

Sigma-Aldrich

1.07960

Entellan

kinematic viscosity

305-427 cSt(20 °C)

kinematic viscosity

-

kinematic viscosity

-

kinematic viscosity

-

transition temp

flash point 19.5 °C

transition temp

-

transition temp

flash point 23 °C

transition temp

flash point 8 °C

density

0.819-0.822 g/cm3 at 20 °C

density

-

density

0.95 g/cm3 at 20 °C

density

0.93 g/cm3

application(s)

diagnostic assay manufacturing
hematology
histology

application(s)

hematology
histology

application(s)

diagnostic assay manufacturing
hematology
histology

application(s)

diagnostic assay manufacturing
hematology
histology

storage temp.

15-25°C

storage temp.

room temp

storage temp.

15-25°C

storage temp.

15-25°C

General description

Neo-Mount -anhydrous mounting medium for microscopy, is an extremely color-stable, ready-to-use mounting medium for microscopy, which is produced with solvents based on mixtures of aliphatic hydrocarbons. It contains an aromatic-free substitute for xylene, thus, Neo-Mount needs to be combined with Neo-Clear (Product number 1.09843) exclusively. Xylene must be avoided in the mounting step, as it will cause the slides to become cloudy and streaked. The application of Neo-Mount is not recommended in fluorescence microscopy for clinical diagnostics. In addition, by placing the dehydrated slides on filter paper for approx. 1 minute prior mounting, any excess of Neo-Clear could be circumvented, as air bubbles might arise under the coverslip. The same precondition should also be met when mounting specimens using cover-slip machines; in this area, Neo-Clear can be most efficiently eliminated by incubation of the slides for one minute in an empty slide rack. Neo-Mount produces a clear and hard film under the cover slip and takes approx. 30 minutes to dry.
Neo-Mount is an IVD product and CE certified and is available as handy 100 ml dropper bottle or 500 ml glass bottle for small or high-throughput demands in the clinical laboratory. For more details, please see instructions for use (IFU). The IFU can be downloaded from this webpage.

Refractive index (20°C) 1.417 - 1.465
Viscosity (20°C) 250 - 350 mPa*s

Analysis Note

Refractive index (n 20/D): 1.4171 - 1.4650
Viscosity (20 °C): 250 - 350 mPa∙s
Suitability for microscopy: passes test

Legal Information

NEO-CLEAR is a trademark of Merck KGaA, Darmstadt, Germany
NEO-MOUNT is a trademark of Merck KGaA, Darmstadt, Germany

Pictograms

FlameExclamation mark

Signal Word

Danger

Hazard Statements

Hazard Classifications

Aquatic Chronic 3 - Flam. Liq. 2 - STOT SE 3

Target Organs

Respiratory system

Supplementary Hazards

Storage Class Code

3 - Flammable liquids

WGK

WGK 3

Flash Point(F)

67.1 °F

Flash Point(C)

19.5 °C


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Customers Also Viewed

Slide 1 of 9

1 of 9

Leonor Gouveia et al.
American journal of physiology. Lung cellular and molecular physiology, 318(4), L831-L843 (2020-03-19)
PDGF-A is a key contributor to lung development in mice. Its expression is needed for secondary septation of the alveoli and deletion of the gene leads to abnormally enlarged alveolar air spaces in mice. In humans, the same phenotype is

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service