MilliporeSigma
All Photos(1)

Documents

MPGP002A1

Milli-Q

Millipak® Filter

0.22 μm membrane filter for particulate and bacteria-free water at the point of dispense for the Milli-Q® IQ, IX and EQ 7 series water purification systems.

Sign Into View Organizational & Contract Pricing

Synonym(s):
Millipak® 0.22 μm filter
eCl@ss:
33050190

material

polyethersulfone filter

Quality Level

packaging

pkg of 1 unit

manufacturer/tradename

Millipak®

pore size

0.22 μm pore size

compatibility

for use with Milli-Q® EQ 7000
for use with Milli-Q® EQ 7008
for use with Milli-Q® EQ 7016
for use with Milli-Q® IX 7003
for use with Milli-Q® IX 7005
for use with Milli-Q® IX 7010
for use with Milli-Q® IX 7015
for use with Milli-Q® IQ 7000
for use with Milli-Q® IQ 7003
for use with Milli-Q® IQ 7005
for use with Milli-Q® IQ 7010
for use with Milli-Q® IQ 7015

shipped in

ambient

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
MPGPG02A1PRPK000A1TANKV01A1
Millipak® Filter 0.22 μm membrane filter for particulate and bacteria-free water at the point of dispense for the Milli-Q® IQ, IX and EQ 7 series water purification systems.

Milli-Q

MPGP002A1

Millipak® Filter

Millipak® Gold Filter For particulates- and bacteria-free water at the point of dispense of the Milli-Q® 7 series water purification systems.

Milli-Q

MPGPG02A1

Millipak® Gold Filter

PrePak Pretreatment Pack For use with Milli-Q® IQ 7003/5/10/15, Milli-Q® IX 7003/5/10/15 and Milli-Q® EQ 7008/16Additional pretreatment pack designed to provide protection and maintain good performance of the reverse osmosis (RO) membrane

Milli-Q

PRPK000A1

PrePak Pretreatment Pack

Vent Filter Protects pure water in Milli-Q® IQ/IX storage tanks from airborne contaminants 

Milli-Q

TANKV01A1

Vent Filter

manufacturer/tradename

Millipak®

manufacturer/tradename

Millipak®

manufacturer/tradename

-

manufacturer/tradename

-

pore size

0.22 μm pore size

pore size

0.22 μm pore size

pore size

0.5 μm pore size (High capacity filter CRW05 type)

pore size

0.45 μm pore size

compatibility

for use with Milli-Q® EQ 7000, for use with Milli-Q® EQ 7008, for use with Milli-Q® EQ 7016, for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015, for use with Milli-Q® IQ 7000, for use with Milli-Q® IQ 7003, for use with Milli-Q® IQ 7005, for use with Milli-Q® IQ 7010, for use with Milli-Q® IQ 7015

compatibility

for use with Milli-Q® EQ 7000, for use with Milli-Q® EQ 7008, for use with Milli-Q® EQ 7016, for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015, for use with Milli-Q® IQ 7000, for use with Milli-Q® IQ 7003, for use with Milli-Q® IQ 7005, for use with Milli-Q® IQ 7010, for use with Milli-Q® IQ 7015

compatibility

for use with Milli-Q® EQ 7008, for use with Milli-Q® EQ 7016, for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015, for use with Milli-Q® IQ 7003, for use with Milli-Q® IQ 7005, for use with Milli-Q® IQ 7010, for use with Milli-Q® IQ 7015

compatibility

for use with Milli-Q® EQ 7008, for use with Milli-Q® EQ 7016, for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015, for use with Milli-Q® IQ 7003, for use with Milli-Q® IQ 7005, for use with Milli-Q® IQ 7010, for use with Milli-Q® IQ 7015

material

polyethersulfone filter

material

polyethersulfone filter

material

polyethylene housing, polypropylene housing

material

-

shipped in

ambient

shipped in

ambient

shipped in

ambient

shipped in

ambient

General description

The Millipak® 0.22μm hydrophilic membrane filter is intended to produce particulate-free and bacteria-free water at the point of dispense of the Milli-Q® IQ 7000 system, Milli-Q® IQ 7003/05/10/15, Milli-Q® IX 7003/05/10/15 and Milli-Q® EQ 7000/08/16 water purification systems..
The filter is designed with a 0.22μm PES (polyethersulfone) asymmetric membrane filter heat-sealed on a styrene-acrylonitrile housing that serves to minimize organic and inorganic extractable release.

Application

Pure and Ultrapure water produced by a Millipak® 0.22 μm filter is suitable for many different laboratory applications, including microplastics research, nanoparticle studies, food analyses and HPLC analyses.

Features and Benefits

  • Each Millipak® 0.22μm filter is individually tested, hermetically sealed and delivered with a Certificate of Quality.
  • Validated to deliver bacteria-free water (<0.01cfu/mL when installed and used in a laminar flow hood).
  • Carefree maintenance: Easily installed and replaced.
  • Redesigned bottom-tip for a secured installation of the protection bell.
  • Validated to deliver particulate-free water (no particles with size >0.22 μm)
  • e-Sure tag for RFID connection with E-POD® or Q-POD® dispenser enables full traceability (data management) and automatic consumable status monitoring on the POD’s touchscreen interface.

Other Notes

Directions For Use:

  • Organism Retention: Microorganisms
  • Mode of Action: Filtering
  • Application: General laboratory analysis
  • Intended Use: Water purification
  • Instructions for Use: This item provides water filtered through 0.22 ?m sterilizing-grade membranes. Refer to the system equipment user guide section "Using the System" (available on USB key in the system box).
  • Storage Statement: Store in a dry location
  • Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.

Legal Information

E-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
MILLIPAK is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany

also commonly purchased with this product

Product No.
Description
Pricing

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Customers Also Viewed

Wendelin Kranz et al.
Journal of pharmaceutical sciences, 108(6), 2022-2032 (2019-01-15)
The aim was to compare the sensitivity of different grades of polysorbate 20 (PS20) and polysorbate 80 (PS80) against enzymatic hydrolysis and oxidative degradation in pharmaceutically relevant buffer systems. For this purpose, a fast liquid chromatography charged aerosol detection method
Zehua Yan et al.
Journal of hazardous materials, 384, 121489-121489 (2019-11-11)
Concerns have been raised regarding the ingestion of microplastics (MPs) by numerous organisms including humans. However, no efficient and standardized methods are available for extracting MPs from feces. In this study, we introduce a novel approach with high digestion efficiency

Articles

This study reviews the suitability of ultrapure water for the IC analysis of drinking water. Inorganic ions and disinfectant by-products (DBPs) were assessed.

Endocrine disruptors such as BPA can interfere with embryological development. This study shows ultrapure water from a Milli-Q® lab water system to be free of detectable BPA and thus suitable for embryology research.

Learn about the importance of lab water quality on Chemical Oxygen Demand (COD) and Biochemical (or Biological) Oxygen Demand (BOD) testing in water and wastewater analysis. Find in-depth guidance to establish the optimal lab water solution for your environmental and process water testing.

Compare RO vs. EDI vs. ion exchange resins to remove silica from water for silica-sensitive applications (e.g. microelectronics, testing chambers, autoclaves, sterilizers, …).

See All

Related Content

Always have confidence in your science with Milli-Q® ultrapure water. Discover our expanded system offer to find the lab water solution that fully satisfies your lab’s needs and constraints.

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service