추천 제품
ligand
carboxymethyl
Quality Level
설명
weak cation exchanger, suspension in 20% ethanol and 150 mM NaCl (40-90 µm)
무균
sterile (Caustic Stable)
제품 라인
Fractogel®
형태
resin
특정 분석물질
MAbs
파라미터
300 cm/hr flow rate
8 bar max. pressure
기질 활성군
methacrylate
평균 입자 크기
40-90 μm
용량
100 mg binding capacity (lysozyme/ml of resin)
전이 온도
flash point 35 °C (calculated)
density
1.43 g/cm3 at 20 °C
응용 분야
recombinant protein
vaccine development
분리 기술
cation exchange
weak cation exchange
저장 온도
2-30°C
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
Weak cation exchange Fractogel® resin featuring the tentacle technology, efficient for difficult aggregate removal
특징 및 장점
Fractogel® EMD COO- (M) enables:
Due to the titration behavior, the ion exchange capacity can be used from pH 6 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the negatively charged regions of the proteins′ surface and the support. Proteins are retained efficiently on Fractogel® EMD COO- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).
The strength of the binding depends on the following:
- Good resolution between monomers and aggregates
- Efficient aggregate and HCP removal combined with high yield
- Compatibility with 2.5 % (v/v) aqueous benzyl alcohol containing 150 mM NaCl storage solution
Due to the titration behavior, the ion exchange capacity can be used from pH 6 to pH 12. The separation of proteins is based on reversible electrostatic interactions between the negatively charged regions of the proteins′ surface and the support. Proteins are retained efficiently on Fractogel® EMD COO- (M) when the pH of the buffer is about 1 unit below their isoelectric points (pl).
The strength of the binding depends on the following:
- the buffer system
- pH value of the buffer which determines the surface charge of the protein
- the degree of the ionization of the functional groups of the exchanger
- the concentration of the counter ions
- the charge density on the support (protein binding capacity)
포장
- 1.16886.0100: Fractogel® EMD COO- (M) Resin 100ml
- 1.16886.0010: Fractogel® EMD COO- (M) Resin 10ml
- 1.16886.0500: Fractogel® EMD COO- (M) Resin 500ml
- 1.16886.5000: Fractogel® EMD COO- (M) Resin 5L
Plastic bottle
분석 메모
Appearance: Milky turbid suspension,free from impurities(foreign particles)
Microscopic evaluation: Uniform spherical particles,no agglomerates,no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 10 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 80 - 120 mg/ml
Functional test (b:a): ≤ 0.30
Functional test (c:d): ≤ 0.70
Functional test: Separation of chymotrypsinogen A, cytochrome C and lysozyme
Microscopic evaluation: Uniform spherical particles,no agglomerates,no fines
Extractable matter (water): ≤ 0.05 %
Cerium: ≤ 10 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1.0 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (lysozyme): 80 - 120 mg/ml
Functional test (b:a): ≤ 0.30
Functional test (c:d): ≤ 0.70
Functional test: Separation of chymotrypsinogen A, cytochrome C and lysozyme
법적 정보
FRACTOGEL is a registered trademark of Merck KGaA, Darmstadt, Germany
Not finding the right product?
Try our 제품 선택기 도구.
신호어
Warning
유해 및 위험 성명서
Hazard Classifications
Flam. Liq. 3
Storage Class Code
3 - Flammable liquids
WGK
WGK 1
Flash Point (°F)
95.0 °F
Flash Point (°C)
35 °C
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.