์ฝ˜ํ…์ธ ๋กœ ๊ฑด๋„ˆ๋›ฐ๊ธฐ
Merck

In vitro antibacterial phenolic extracts from "sugarbag" pot-honeys of Australian stingless bees (Tetragonula carbonaria).

Journal of agricultural and food chemistry (2014-11-26)
C Flavia Massaro, Daniel Shelley, Tim A Heard, Peter Brooks
์ดˆ๋ก

Australian stingless bee honeys have been shown to exert antioxidant and in vitro antimicrobial properties; however their bioactive factors remained unidentified. This study investigated the antibacterial properties of phenolic extracts from Tetragonula carbonaria honeys. Honeys were harvested from beehives in three sites of South East Australia. Liquid-liquid extractions yielded the phenolic concentrates, for analyses by liquid and gas chromatography mass spectrometry. Antibacterial assays were conducted against Staphylococcus aureus and Klebsiella pneumoniae by in vitro agar diffusion and broth dilution assays. The phenolic extracts averaged to 5.87 mg/100 g of raw honeys, and constituents were 3-phenyllactic acid, lumichrome, diglycosylflavonoids, norisoprenoids. The honeys did not contain methylglyoxal, dihydroxyacetone or phenolics characteristic of Leptospermum nectars. Hydrogen peroxide content amounted up to 155.8 ฮผM in honeys. Beside the bactericidal effects of hydrogen peroxide at 760 ฮผM, other antibacterial factors were the phenolic extracts of "sugarbag" honeys that were active at minimum bactericidal concentrations of 1.2-1.8 mg/mL.

MATERIALS
์ œํ’ˆ ๋ฒˆํ˜ธ
๋ธŒ๋žœ๋“œ
์ œํ’ˆ ์„ค๋ช…

Sigma-Aldrich
Hydrogen peroxide solution, 34.5-36.5%
Supelco
N,O-Bis(trimethylsilyl)trifluoroacetamide with trimethylchlorosilane, for GC derivatization, LiChropurโ„ข, contains 1% TMCS, 99% (excluding TMCS)
Supelco
Hydrogen peroxide solution, ≥30%, for trace analysis
Millipore
Hydrogen peroxide solution, 3%, suitable for microbiology
Supelco
Hexadecane, analytical standard
Sigma-Aldrich
Hexadecane, ReagentPlusยฎ, 99%
Sigma-Aldrich
Hydroxyacetone, contains ≤500 ppm sodium carbonate as stabilizer, technical grade, 90%
Sigma-Aldrich
Hydrogen peroxide solution, tested according to Ph. Eur.
Sigma-Aldrich
5-Hydroxymethyl-2-furaldehyde, 99%
Sigma-Aldrich
5-(Hydroxymethyl)furfural, ≥99%, FG
Sigma-Aldrich
Pyruvaldehyde solution, 40 wt. % in H2O
Sigma-Aldrich
Hydrogen peroxide solution, 30 % (w/w) in H2O, contains stabilizer
Supelco
N,O-Bis(trimethylsilyl)trifluoroacetamide with trimethylchlorosilane, with 1% trimethylchlorosilane, for GC derivatization, LiChropurโ„ข
Sigma-Aldrich
3-Phenyllactic acid, ≥98%
Supelco
N,O-Bis(trimethylsilyl)trifluoroacetamide with trimethylchlorosilane, for GC derivatization, LiChropurโ„ข, contains 10% TMCS, 98% (excluding TMCS)
Supelco
Hydrogen peroxide solution, 30 % (w/w), for ultratrace analysis
Supelco
5-(Hydroxymethyl)furfural, analytical standard
Sigma-Aldrich
Methanol, puriss., meets analytical specification of Ph Eur, ≥99.7% (GC)
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, ≥99.9%
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, gradient grade, suitable as ACS-grade LC reagent, ≥99.9%
Sigma-Aldrich
Methanol, suitable for HPLC, ≥99.9%
Sigma-Aldrich
Methanol, Laboratory Reagent, ≥99.6%
Supelco
Methanol, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Methanol, BioReagent, ≥99.93%
Sigma-Aldrich
Methanol, Absolute - Acetone free
Sigma-Aldrich
Ethyl alcohol, Pure 190 proof, for molecular biology
Sigma-Aldrich
Methanol, ACS spectrophotometric grade, ≥99.9%
Sigma-Aldrich
Methanol, ACS reagent, ≥99.8%
Sigma-Aldrich
Methanol, puriss. p.a., ACS reagent, reag. ISO, reag. Ph. Eur., ≥99.8% (GC)