Influence of the pore structure and surface chemistry on adsorption of ethylbenzene and xylene isomers by KOH-activated multi-walled carbon nanotubes.

Influence of the pore structure and surface chemistry on adsorption of ethylbenzene and xylene isomers by KOH-activated multi-walled carbon nanotubes.

Journal of hazardous materials (2012-09-12)

Fei Yu, Yanqing Wu, Jie Ma

ABSTRACT

To investigate the effect of pore structure and surface chemistry on adsorption of monoaromatics, multi-walled carbon nanotubes (MWCNTs) with different specific surface area (SSA) and surface oxygen content by KOH activation treatment have been prepared. The results indicate that adsorption of four test chemicals is enhanced by 2-3, 7-9 and 10-13 times for CNTs-K1 (MWCNTs:KOH=1:1), CNTs-K4 (MWCNTs:KOH=1:4) and CNTs-K6 (MWCNTs:KOH=1:6) as justified by the ratios of adsorption coefficient. Adsorption properties of ethylbenzene and xylene isomers (EX) by activated-MWCNTs depend significantly on mesopore volumes and hydroxyl groups. There are strong positive correlations between the adsorption capacity (or adsorption affinity) and mesopore volumes or hydroxyl groups. Mesopore-filling could be a predominant mechanism governing monoarmatics adsorption onto activated-MWCNTs, contributing more than simply increasing SSA. The hydroxyl groups at low concentration can improve diffusion of MWCNTs in water, which could be favorable for aqueous phase adsorption. However, it is not large enough to form a lot of water clusters to hinder EX adsorption. This is the first systematic study of the influence of physicochemical properties on adsorption of monoaromatics onto activated-MWCNTs by qualitative and quantitative analysis, and results highlight the synergetic effects of porosity and surface chemistry in controlling adsorption of monoaromatics onto MWCNTs in wastewater treatment.

MATERIALS

Product Number

Brand

Product Description

487104

Supelco

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d (99.8 atom % D), TMS 0.01 %, NMR tube size 5 mm × 8 in.

487120

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d (99.8 atom % D), TMS 0.01 %, NMR tube size 8 mm × 8 in.

612480

Supelco

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d (99.8 atom % D), chromium(III) acetylacetonate 0.1 mg/mL, TMS 0.01 %, NMR tube size 5 mm × 8 in.

612065

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d (99.8 atom % D), TMS 0.01 %, NMR tube size 10 mm × 8 in.

714917

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d (99.8 atom % D), TMS 0.01 %, NMR tube size 5 mm × 8 in. , ultra-thin wall

551341

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 5% in chloroform-d (99.8 atom % D), TMS 2 %, NMR tube size 5 mm × 8 in.

710725

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 5% in chloroform-d (99.8 atom % D), TMS 1 %, NMR tube size 5 mm × 7 in.

717967

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d (99.8 atom % D), TMS 0.1 %

717959

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 1% in chloroform-d (99.8 atom % D)

708046

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 10% in chloroform-d (99.8 atom % D)

736198

Supelco

Ethylbenzene solution, NMR reference standard, 10% in chloroform-d (99.8 atom % D), NMR tube size 5 mm × 8 in. , ultra-thin wall

733768

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 10% in chloroform-d (99.8 atom % D), NMR tube size 10 mm × 8 in.

708054

Sigma-Aldrich

Ethylbenzene solution, NMR reference standard, 0.1% in chloroform-d ("100%", 99.96 atom % D)

61699

Supelco

Potassium hydroxide concentrate, 0.1 M KOH in water (0.1N), Eluent concentrate for IC

03079

Supelco

Ethylbenzene, analytical standard

60377

Sigma-Aldrich

Potassium hydroxide, tested according to Ph. Eur.

296848

Sigma-Aldrich

Ethylbenzene, anhydrous, 99.8%

24-4750

Sigma-Aldrich

Potassium hydroxide solution, 0.1 M in ethanol

24-4770

Sigma-Aldrich

Potassium hydroxide solution, 0.1 M in isopropanol

24-4740

Sigma-Aldrich

Potassium hydroxide solution, 0.5 M in ethanol

24-4725

Sigma-Aldrich

Potassium hydroxide solution, 0.5 M

24-4730

Sigma-Aldrich

Potassium hydroxide solution, 0.1 M

24-4720

Sigma-Aldrich

Potassium hydroxide solution, 1 M

24-4756

Sigma-Aldrich

Potassium hydroxide solution, 0.02 M in ethanol

P5958

Sigma-Aldrich

Potassium hydroxide, BioXtra, ≥85% KOH basis

P4494

Supelco

Potassium hydroxide solution, volumetric, 8.0 M KOH (8.0N)

P1767

Sigma-Aldrich

Potassium hydroxide, ≥85% KOH basis, pellets, white

06005

Sigma-Aldrich

Potassium hydroxide, puriss., meets analytical specification of Ph. Eur., BP, 85-100.5%, pellets

06103

Sigma-Aldrich

Potassium hydroxide, technical, ≥85%, powder

484016

Sigma-Aldrich

Potassium hydroxide, reagent grade, 90%, flakes