콘텐츠로 건너뛰기
Merck
모든 사진(1)

문서

907669

Sigma-Aldrich

Silver ink

75 wt%, LIFT printable

동의어(들):

Ag ink, Laser induced forward transfer

로그인조직 및 계약 가격 보기
모든 사진(1)

About This Item

Linear Formula:
Ag
UNSPSC 코드:
12352103
NACRES:
NA.23

설명

Silver content : 75 wt%
Solvent : Diethylene Glycol Mono Butyl Ether (DGBE)
Surface Tension : 28 dyn/cm (Pendant Drop)

형태

paste

입자 크기

50-70 nm (by Lumisizer™)
90-120 nm (by Lumisizer™)

점도

50,000-100,000 cP (Shear Rate: 1 s-1
250cP - 450 cP (Shear Rate: 1000 s-1))

density

2.85-3.3

저장 온도

15-25°C

관련 카테고리

애플리케이션

This Ag ink product is a conductive high viscous ink based on single-crystal silver nanoparticles in an organic solvent, has been designed for LIFT (Laser Induced Forward Transfer) digital printing and laser sintering.

The ink offers:
  • Uniform and reproducible donor layer with low drying speed
  • Stable accurate jetting in different types of laser systems, wide working window of jetting parameters
  • High speed printing (20-50kHz), allowing high throughput
  • Narrow patterning on plastic and glass substrates (line width ∼50 μm, height ∼0.5 μm, spacing ∼50 μm)
  • Laser sintering of LIFT printed pattern, providing good electrical properties


Fit for:
LIFT digital printing
Additive electronic manufacturing
Printed electronics: RFID, FPD, Sensors

Laser induced forward transfer printing (LIFT) is a non-contact, nozzle-free, one step, direct laser writing process.
LIFT can operate under atmospheric conditions, is compatible with low laser fluences, allows the printing of organic and inorganic materials as well as biological elements. The printing process can take place from both liquid and solid phases. It further has a high lateral resolution only defined by the laser spot size. It is a method compatible with inorganic semiconductor sensor fabrication, OLED fabrication and bio printing.

기타 정보

Resistivity (4PP): After laser sintering* ≤ 8 μΩ·cm (≤ 5 bulk) for LIFT printed line (∼1-2 μm thick) on plastic substrate
*Parameters should be optimized depending on line geometry and substrate

저장 및 안정성

Keep container tightly closed. Store at room temperature, do not heat above 60 °C and do not freeze.

법적 정보

Lumisizer is a trademark of LUM GmbH

픽토그램

Exclamation markEnvironment
GHS07,GHS09

신호어

Warning

유해 및 위험 성명서

H319,H410

Hazard Classifications

Aquatic Acute 1 - Aquatic Chronic 1 - Eye Irrit. 2

Storage Class Code

10 - Combustible liquids

WGK

WGK 3

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable

시험 성적서(COA)

제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

이미 열람한 고객

Slide 1 of 1

1 of 1

Silver, dispersion nanoparticle, 30-35 wt. % in triethylene glycol monoethyl ether, spec. resistivity 11 μΩ-cm, for printing on plastic films

Sigma-Aldrich

736465

Silver, dispersion

V S Cheptsov et al.
Letters in applied microbiology, 67(6), 544-549 (2018-09-18)
Recently, it was shown that laser-induced forward transfer (LIFT) technology and the laser engineering of microbial systems (LEMS) technique (based on LIFT method) are effective for isolation of micro-organisms from different complex substrates. These techniques frequently utilize Au as an
Laser-induced forward transfer from healing silver paste films printing
Turkoz E, et al.
Applied Physics Letters, 113(22), 221601/1-221601/5 (2018)
Printing of complex free-standing microstructures via laser-induced forward transfer (LIFT) of pure metal thin films
Feinaeugle M, et al.
Additive Manufacturing, 24, 391-399 (2018)

문서

High Crystalline Organic Transistors

Small molecular weight organic semiconductors are promising for flexible transistor applications in next-gen soft electronics.

Advancements in Organic Electronics

Professors Tokito and Takeda share design principles and optimization protocols for organic electronic devices, focusing on flexibility and low cost.

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.