TRD3D0060

Tenax PC-ABS 3D Printing Filament

signal white, diam. 1.75 mm

• UNSPSC 코드: 12352203
• NACRES: NA.23

속성

• 환경친화적 대안 제품 특성: Design for Energy Efficiency; Learn more about the Principles of Green Chemistry.
• sustainability: Greener Alternative Product
• 직경: 1.75 mm
• 중량: 500 geach
• 환경친화적 대안 카테고리: Enabling,

설명

일반 설명

We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product belongs to Enabling category of greener alternatives thus aligns with "Design for energy efficency". Tenax PC-ABS printing filament has high mechanical strength and toughness with odourless composition and low wrapping. Click here for more information.

Tenax PC-ABS 3D Printing Filament:

• Odourless composition and low warping
• Very high mechanical strenghth and toughness
• Obtain a shiny finish
• Certified for automotive

Material Properties

• Density: 1.1 g/cm3
• Water absorption: 0.9%
• Tensile modulus: 2000 MPa
• Tensile stress: 43 MPa
• Tensile strain at break: 90%
• Vicat point: 108°C
• Heat deflection: 93°C
• Charpy notched impact at 23°C: 50 kJ/m2
• Charpy notched impact at -30°C: 50 kJ/m2

애플리케이션

This product can be used in material extrusion 3D printing technique.

Tenax PC-ABS 3D Printing Parameters

• Extruder (nozzle) temperature: 250 +/- 10 °C
• Bed temperature: 100 +/- 10 °C
• Print speed: 50-60 mm/s
• Fan: 0-20 %
• Minimum nozzle diameter: 0.4 mm
• Plate materials: blue tape, kapton tape, etc.

안전성 정보

• Storage Class Code: 11 - Combustible Solids
• WGK: WGK 3
• Flash Point (°F): Not applicable
• Flash Point (°C): Not applicable