추천 제품
ligand
(Trimethylammoniumethyl)
Quality Level
설명
strong anion exchanger, suspension in 20% ethanol and 150 mM NaCl (40-90 µm)
무균
sterile (Caustic Stable)
형태
resin
특정 분석물질
MAbs
파라미터
180 cm/hr flow rate
8 bar max. pressure
기질 활성군
methacrylate
평균 입자 크기
40-90 μm
용량
180 mg binding capacity (BSA/mg of resin)
전이 온도
flash point 35 °C (calculated)
density
1.430 g/cm3 at 20 °C
벌크 밀도
1000 kg/m3
응용 분야
recombinant protein
분리 기술
anion exchange
strong anion exchange
저장 온도
2-30°C
유사한 제품을 찾으십니까? 방문 제품 비교 안내
일반 설명
특징 및 장점
- Efficiently capture target protein and remove viruses, DNA, and endotoxins with its tentacle technology resulting in better production yields and high throughput
- Reduce operating costs and resin replacement with enduring durability - allowing for multiple cycles of column regeneration and sanitization
- Compatibility with 2.5 % (v/v) aqueous benzyl alcohol containing 150 mM NaCl storage solution
Due to the titration behavior of Fractogel® EMD TMAE Hicap (M) the ion exchange capacity can be used from pH 2 to 12. The separation of proteins is based on reversible electrostatic interactions between the negatively charged regions of the proteins′ surface and the support. Proteins are retained efficiently on Fractogel® EMD TMAE Hicap (M) when the pH of the buffer is about 1 unit above their isoelectric points (pl).
The strength of the binding depends on the following:
- the buffer system
- pH value of the buffer which determines the surface charge of the protein
- the concentration of the counter ions
- the charge density on the support (protein binding capacity)
포장
- 1.10316.0100: Fractogel® EMD TMAE Hicap (M) Resin 100ml
- 1.10316.0010: Fractogel® EMD TMAE Hicap (M) Resin 10ml
- 1.10316.0500: Fractogel® EMD TMAE Hicap (M) Resin 500ml
- 1.10316.5000: Fractogel® EMD TMAE Hicap (M) Resin 5L
분석 메모
Microscopic evaluation: Uniform spherical particles,no agglomerates,no fines
Extractable matter (water): ≤ 0.03 %
Cerium: ≤ 1 µg/g
Pressure drop(column: ID=1.6 cm, L=10 cm at 5 ml/min): ≤ 1 bar
Particle size (d10): 37 - 45 µm
Particle size (d50): 48 - 60 µm
Particle size (d90): 63 - 77 µm
Colony forming units (TAMC + TYMC): ≤ 100 CFU/ml
Endotoxins: ≤ 1.00 EU/ml
Protein binding capacity (bovine serum albumin): 160 - 200 mg/ml
Functional test (b:a): ≤ 0.25
Functional test: Separation of conalbumin and human serum albumin
법적 정보
신호어
Warning
유해 및 위험 성명서
Hazard Classifications
Flam. Liq. 3
Storage Class Code
3 - Flammable liquids
WGK
WGK 1
Flash Point (°F)
95.0 °F
Flash Point (°C)
35 °C
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
문서
A custom-designed cost model is used to explore the economics of vaccine manufacturing across several different modalities including mRNA. The model enables greater process understanding, simulates bottlenecks, and helps to optimize production efficiency.
Influenza vaccines are commonly made using egg-based and cell-based manufacturing strategies. Find step-by-step information on the manufacturing process for each method.
Learn more one the attenuated viral vaccines manufacturing process: cell culture, clarification, nuclease treatment, chromatography, and sterile filtration.
This technical article breaks down the steps of upstream and downstream bioprocessing and formulation of virus-like particle vaccines.
관련 콘텐츠
This technical article breaks down the adenovirus vaccine manufacturing process and provides a case study on developing an accelerated and cost-effective single-use adenoviral vector vaccine.
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.