31185
D.E.R.™ 332
used as embedding medium
동의어(들):
Bisphenol A diglycidyl ether, Epoxy-Resin, 2,2-Bis[4-(glycidyloxy)phenyl]propane, 4,4′-Isopropylidenediphenol diglycidyl ether, BADGE, D.E.R.™ 332
로그인조직 및 계약 가격 보기
모든 사진(1)
About This Item
실험식(Hill 표기법):
C21H24O4
CAS Number:
Molecular Weight:
340.41
Beilstein:
299026
EC Number:
MDL number:
UNSPSC 코드:
12161502
PubChem Substance ID:
NACRES:
NA.25
추천 제품
애플리케이션
The uniqueness of D.E.R. 332 epoxy resin is reflected in its maximum epoxide equivalent weight of 178. Because of its high purity and lack of polymer factions, samples embedded using D.E.R. 322 have uniform performance, exceptionally low viscosity and color; and improved elevated temperature properties.
주의사항
Crystallizes very slowly at room-temperature; can be melted by heating up to 50-55 °C
법적 정보
D.E.R. is a trademark of The Dow Chemical Company or an affiliated company of Dow
관련 제품
제품 번호
설명
가격
신호어
Warning
유해 및 위험 성명서
Hazard Classifications
Aquatic Chronic 2 - Eye Irrit. 2 - Skin Irrit. 2 - Skin Sens. 1
Storage Class Code
10 - Combustible liquids
WGK
WGK 1
Flash Point (°F)
507.2 - 514.4 °F - closed cup
Flash Point (°C)
264 - 268 °C - closed cup
개인 보호 장비
dust mask type N95 (US), Eyeshields, Faceshields, Gloves
시험 성적서(COA)
제품의 로트/배치 번호를 입력하여 시험 성적서(COA)을 검색하십시오. 로트 및 배치 번호는 제품 라벨에 있는 ‘로트’ 또는 ‘배치’라는 용어 뒤에서 찾을 수 있습니다.
이미 열람한 고객
Mengyang Hu et al.
Journal of colloid and interface science, 552, 319-331 (2019-05-28)
The aqueous dispersion of graphene oxide (GO) was employed as additive to fabricate antifouling and antibacterial polyethersulfone (PES)/sulfonated polysulfone (SPSf)/GO mixed matrix membranes (MMMs) by the non-solvent induced phase separation (NIPS). The effect of different amounts of GO on the
Evgeniy M Chistyakov et al.
Polymers, 11(7) (2019-07-20)
The method of optical wedge revealed that the optimum temperature for compatibility of hexakis(4-acetamidophenoxy)cyclotriphosphazene (ACP) and DER-331 epoxy resin is in the range of 220-260 °C. The interdiffusion time of components at these temperatures is about 30 min. The TGA
Samsul Rizal et al.
Materials (Basel, Switzerland), 12(14) (2019-07-13)
The aim of this paper is to evaluate the Mode II interfacial fracture toughness and interfacial shear strength of Typha spp. fiber/PLLA and Typha spp. fiber/epoxy composite by using a double shear stress method with 3 fibers model composite. The
Ayşe Aydoğmuş Erik et al.
Microscopy research and technique, 82(9), 1448-1454 (2019-05-24)
This experimental study aims to evaluate the radiopacity of various fiber post materials and to determine the effects of material composition as analyzed by energy-dispersive X-ray spectrophotometry (EDS; EDAX Team Software; EDAX, Inc., Mahwah, NJ) on radiopacity. Five specimens of
Jue Ann Soh et al.
Australian endodontic journal : the journal of the Australian Society of Endodontology Inc, 45(2), 171-176 (2018-09-20)
In endodontic infections, inflammatory mediators such as cytokines are released, recruited and retained until the infection is eradicated. Root canal therapy is performed to prevent the spread of infection. The aim of this study was to investigate the effects of
자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..
고객지원팀으로 연락바랍니다.