Documents
791504
Carbon nanotube, single-walled, conductive aqueous ink
0.9-1.1 g/L (SWCNT concentration by Absorbance at 854 nm)
Recommended Products
form
dispersion in H2O (black liquid)
Quality Level
greener alternative product characteristics
Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.
concentration
0.9-1.1 g/L (SWCNT concentration by Absorbance at 854 nm)
sheet resistance
<600 Ω/sq, at 85% VLT (ohm/square) (by 4-point probe on prepared film by rod coating)
viscosity
3.0 mPa.s (at 10 sec-1 shear rate)
density
1 g/cm3
greener alternative category
Related Categories
1 of 4
This Item | 791490 | 792462 | 900711 |
|---|---|---|---|
| greener alternative product characteristics Design for Energy Efficiency | greener alternative product characteristics Design for Energy Efficiency | greener alternative product characteristics Design for Energy Efficiency | greener alternative product characteristics - |
| concentration 0.9-1.1 g/L (SWCNT concentration by Absorbance at 854 nm) | concentration 0.2 g/L (by Absorbance at 854 nm) | concentration 1 mg/mL | concentration - |
| sheet resistance <600 Ω/sq, at 85% VLT (ohm/square) (by 4-point probe on prepared film by rod coating) | sheet resistance - | sheet resistance <1000 Ω/sq, by 4-point probe on prepared (at 87.5% VLT (ohm/sq)) | sheet resistance - |
| viscosity 3.0 mPa.s (at 10 sec-1 shear rate) | viscosity ~1.0 mPa.s | viscosity 17.7 Pa.s(25 °C) (at 10 sec-1 shear rate) | viscosity - |
| density 1 g/cm3 | density 1 g/cm3 | density - | density 1.7-1.9 g/cm3 at 25 °C (lit.) |
General description
Application
Legal Information
Signis is a registered trademark of Chasm Advanced Materials, Inc.
CoMoCAT is a trademark of Chasm Advanced Materials, Inc.
CHASM is a trademark of Chasm Advanced Materials, Inc.
Signal Word
Warning
Hazard Statements
Precautionary Statements
Hazard Classifications
Aquatic Chronic 3 - Eye Irrit. 2
Storage Class Code
12 - Non Combustible Liquids
WGK
WGK 3
Flash Point(F)
Not applicable
Flash Point(C)
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Customers Also Viewed
Articles
The emerging field of printed electronics requires a suite of functional materials for applications including flexible and large-area displays, radio frequency identification tags, portable energy harvesting and storage, biomedical and environmental sensor arrays,5,6 and logic circuits.
Boron nitride nanotubes (BNNT) are close structural analogs of carbon nanotubes (CNT), which are high aspect ratio nanotubular material, where carbon atoms are alternately substituted by nitrogen and boron atoms.
Professor Rivnay (Northwestern University, USA) discusses using organic mixed conductors as an alternative to efficiently bridge the ionic world of biology with contemporary microelectronics.
A nanocomposite is typically defined as a mixture between a host material (e.g., polymer matrix) and nanofillers with at least one dimension of less than 100 nm.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service