Recommended Products
grade
ACS reagent
Quality Level
agency
reag. Ph. Eur.
suitable for SM 2310
suitable for SM 2320
vapor pressure
<0.00001 Pa ( 50 °C)
form
solid
loss
≤1% loss on drying, 105°C
color
white to yellow-white
visual transition interval
8.2-9.8, colorless to red-violet
mp
263.7 °C
density
1.296 g/cm3 at 20 °C
bulk density
350‑450 kg/m3
λmax
551-554 nm (buffer pH 9.8)
storage temp.
2-30°C
InChI
1S/C20H14O4/c21-15-9-5-13(6-10-15)20(14-7-11-16(22)12-8-14)18-4-2-1-3-17(18)19(23)24-20/h1-12,21-22H
InChI key
KJFMBFZCATUALV-UHFFFAOYSA-N
Looking for similar products? Visit Product Comparison Guide
Related Categories
Application
- Effectiveness of Phenolphthalein in Sol-Gel Coatings for Sensing and Inhibiting Corrosion on Mild Steel: Research detailing the application of phenolphthalein and Thymol Blue in sol-gel coatings, demonstrating their effectiveness in corrosion inhibition and sensing on mild steel surfaces (Patra et al., 2024).
- Highly Permeable Ultrafiltration Membranes Based on Polyphenylene Sulfone with Cardo Fragments: This article discusses the development of advanced ultrafiltration membranes incorporating phenolphthalein, enhancing their permeability and filtration efficiency (Raeva et al., 2024).
- A fluorescence-based dual sensor for Zn(2+) and PO(4)(3-): Study on a dual sensor system utilizing phenolphthalein, applied for the detection of zinc and phosphate ions in various environmental and biological samples, employing fluorescence signaling (Samanta et al., 2024).
Analysis Note
Appearance: White to yellowish white powder
Clarity of the alkoholic solution (10 g/l ethanol): passes test
Absorption maximum λmax. (buffer pH 9.8): 551 - 554 nm
Spec. Absorptivity A 1%/1cm (λmax; 0.01 g/l; buffer pH 9.8; calculated on dried substance): 700 - 750
Transition range: pH 8.2 - pH 9.8 almost colorless - red-violet
Transition range (according to ACS): passes test
Transition interval (according Reag. Ph Eur): passes test
Loss on drying (105 °C): ≤ 1 %
signalword
Danger
Hazard Classifications
Carc. 1B - Muta. 2 - Repr. 2 - Skin Irrit. 2
Storage Class
6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
wgk_germany
WGK 3
flash_point_f
Not applicable
flash_point_c
Not applicable
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Find documentation for the products that you have recently purchased in the Document Library.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service