Documents
SX0002500
Swinnex Filter Holder
Swinnex Filter Holder, 25mm
Recommended Products
material
polypropylene device
silicone gasket
silicone seal
Quality Level
manufacturer/tradename
Swinnex®
parameter
121 °C max. temp.
3.5 bar max. inlet pressure (50 psi)
technique(s)
pressure filtration: suitable
L
3.7 cm
diam.
3.2 cm
filter diam.
25 mm
filtration area
3.4 cm2
prefilter diam.
22 mm , thick depth prefilter
fitting
female Luer-Lok® inlet connection
female Luer-Lok® inlet fitting
male Luer outlet slip
application(s)
filtration
compatibility
for use with Sterifil Aseptic System
shipped in
ambient
Related Categories
1 of 4
This Item | SX0001300 | SX0004700 | NY2002500 |
|---|---|---|---|
| manufacturer/tradename Swinnex® | manufacturer/tradename Swinnex® | manufacturer/tradename Swinnex® | manufacturer/tradename Millipore |
| parameter 121 °C max. temp. | parameter 121 °C max. temp., 3.5 bar max. inlet pressure (50 psi) | parameter 5.2 bar max. inlet pressure (75 psi) | parameter 100 °C max. temp. (curling may be seen at temperatures above 75°C) |
| L 3.7 cm | L 3.5 cm | L 5.4 cm | L - |
| diam. 3.2 cm | diam. 1.7 cm | diam. 5.8 cm (2.3 in.) | diam. - |
| filter diam. 25 mm | filter diam. 13 mm | filter diam. 47 mm | filter diam. 25 mm |
General description
Features & Benefits:
•Available in three sizes for a range of process volumes
•Autoclavable with filter in place for sterile filtration
SX0001300 Swinnex Filter Holder, 13 mm
SX0002500 Swinnex Filter Holder, 25 mm
SX0004700 Swinnex Filter Holder, 47 mm
Replacement Parts
SX0001301 Silicone Gaskets for 13 mm Swinnex Filter Holder
SX0002501 Silicone Gaskets for 25 mm Swinnex Filter Holder
XX2702510 Support Screen, 25 mm, polypropylene
XX1104715 Support Screen, 47 mm, polypropylene
XX1104707 O-ring (5-329) for Swinnex 47 mm Filter Holder, silicone
SX0004701 Base O-ring for Swinnex 47 mm Filter Holder, silicone
SX00047RK Replacement Parts Kit for Swinnex 47 mm Filter Holder
Application
Principle
Preparation Note
Autoclavable with filter in place
Legal Information
Certificates of Analysis (COA)
Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.
Already Own This Product?
Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.
Difficulty Finding Your Product Or Lot/Batch Number?
How to Find the Product Number
Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (Example: T1503).
Example:
Additional examples:
705578-5MG-PW
PL860-CGA/SHF-1EA
MMYOMAG-74K-13
1000309185
enter as 1.000309185)
Having trouble? Feel free to contact Technical Service for assistance.
How to Find a Lot/Batch Number for COA
Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.
Aldrich Products
For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').
For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').
For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.
Not Finding What You Are Looking For?
In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.
Customers Also Viewed
Articles
Validation of Millex® PES syringe filters in PFAS testing of water samples using EPA method 537.1.
Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.
Contact Technical Service