MilliporeSigma
All Photos(1)

Documents

VPMSKITNB9

Millipore

Viresolve® Pro Micro Shield Kit

Sign Into View Organizational & Contract Pricing

eCl@ss:
32031690

material

molded polypropylene component(s)
polyethersulfone membrane
white device (magenta band)

Quality Level

manufacturer/tradename

Viresolve®

parameter

3.5 bar max. inlet pressure (50 psig)
4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)

H × diam.

3.83 cm (1.51 in.) × 3.07 cm (1.21 in.)

H

3.83 cm (1.51 in.)

diam.

3.07 cm (1.21 in.)

filtration area

3.1 cm2

impurities

<0.25  EU/mL USP bacterial endotoxins (LAL test, sample aqueous extraction)

fitting

female Luer-Lok® inlet (inlet and vent)
female Luer inlet fitting
male Luer outlet (Slip)
male Luer outlet fitting

application(s)

(Process development studies, Viral clearance evaluations)

shipped in

ambient

Related Categories

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
VPMHKITNB9VPPH101NB1VPPH103NB1
vibrant-m

VPPH101NB1

Viresolve® Pro Modus 1.1

vibrant-m

VPPH103NB1

Viresolve® Pro Modus 1.3

fitting

female Luer-Lok® inlet (inlet and vent), male Luer outlet (Slip), female Luer inlet fitting, male Luer outlet fitting

fitting

female Luer-Lok® inlet (inlet and vent), male Luer outlet (Slip)

fitting

3/4 in. inlet/outlet sanitary fitting(s), 1/8 in. integrated vent hose barb (with double O-ring seal)

fitting

3/4 in. inlet/outlet sanitary fitting(s), 1/8 in. integrated vent hose barb (with double O-ring seal)

material

molded polypropylene component(s), white device (magenta band), polyethersulfone membrane

material

polyethersulfone membrane ((PES)), white PVDF device (molded parts (yellow band))

material

PVDF housing, polyethersulfone membrane, silicone O-ring, white device

material

PVDF housing, polyethersulfone membrane, silicone O-ring, white device

application(s)

(Process development studies, Viral clearance evaluations)

application(s)

-

application(s)

-

application(s)

-

manufacturer/tradename

Viresolve®

manufacturer/tradename

-

manufacturer/tradename

Viresolve®

manufacturer/tradename

Viresolve®

parameter

3.5 bar max. inlet pressure (50 psig)

parameter

4.1 bar max. pressure (60 psid) at 25 °C (Samples were integral based on an Air/ Water Diffusion Test, before and after a forward stress.)

parameter

4.1 bar max. inlet pressure (60 psig)

parameter

4.1 bar max. inlet pressure (60 psig)

General description

Device Configuration: Micro
The Viresolve Pro PD kit is ideally suited for performing your evaluation, optimization and scaling studies. Each kit contains 9 Micro devices from one membrane layering combination*, a user guide and certificate of quality. The air vent prevents air locking within the device.

* Viresolve Pro devices are built with two membrane layers. Each Viresolve Pro Micro device is packaged in a blister pack and labeled with the device lot and the top layer membrane lot/roll number.

Features and Benefits

  • Small scale devices for process development, optimization and validation studies
  • Membrane based adsorptive prefilters to remove protein aggregates and other fouling species
  • Nine units per kit (one Membrane lot)

Other Notes

These products are manufactured in a facility which adheres to FDA Good Manufacturing Practices.

Preparation Note

This product was manufactured with materials that meet the criteria for a "non-fiber releasing" filter as defined in 21 CFR 210.3 (b) (6).

Analysis Note

TOC/Conductivity
After a controlled water flush of 50 L/m², samples exhibited less than 500 ppb TOC per USP <64> and less than 1.3 µS/cm per USP <64>.

Legal Information

Luer-Lok is a registered trademark of Becton-Dickinson & Co.
VIRESOLVE is a registered trademark of Merck KGaA, Darmstadt, Germany

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service