MilliporeSigma
All Photos(1)

Documents

Z707562

TPP® tissue culture flasks

Sign Into View Organizational & Contract Pricing

Synonym(s):
T300 flask, cell culture flask, tissue culture flask
NACRES:
NB.22

material

angled neck
polystyrene
screw top cap

sterility

sterile
sterile

feature

with cap (filtered)

packaging

case of 18 ea
case of 18
pack of 3

manufacturer/tradename

TPP 90301

capacity

410 mL

external L × W × H

270 mm × 170 mm × 45 mm

surface area

300 cm2 , growth surface (cm2)

working volume

30-40 mL

suitability

suitable for (cell culture; tissue culture)

binding type

Tissue Culture (TC)-treated surface

Looking for similar products? Visit Product Comparison Guide

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
Z707554Z707511Z707481
TPP® tissue culture flasks

Z707562

TPP® tissue culture flasks

TPP® tissue culture flasks

Z707554

TPP® tissue culture flasks

TPP® tissue culture flasks

Z707511

TPP® tissue culture flasks

TPP® tissue culture flasks

Z707481

TPP® tissue culture flasks

binding type

Tissue Culture (TC)-treated surface

binding type

Tissue Culture (TC)-treated surface

binding type

Tissue Culture (TC)-treated surface

binding type

Tissue Culture (TC)-treated surface

manufacturer/tradename

TPP 90301

manufacturer/tradename

TPP 90151

manufacturer/tradename

TPP 90150

manufacturer/tradename

TPP 90025

material

angled neck , screw top cap, polystyrene

material

angled neck , polystyrene , screw top cap

material

angled neck , polystyrene , screw top cap

material

angled neck , polystyrene , polystyrene flask, screw top cap

capacity

410 mL

capacity

165 mL

capacity

165 mL

capacity

15 mL

feature

with cap (filtered)

feature

with cap (filtered)

feature

vented, with cap

feature

vented, with cap

General description

The inside surface treatment by TPP provides an optimal growth surface on the flask base for the most varied matrix-dependent tissue cultures. The untreated side and top inside surfaces reduce the amount of cell loss during the separation phases, because undesired tissue adhesion outside the growth zone is diminished. The flask′s innovative shape is of such a design that devices inserted through the flask′s neck have optimal access to the entire base surface. This means that there are no "dead" corners that cannot be reached with pipettes or cell scrapers.

This excellent accessibility is due to the large neck opening and the favorable angle of inclination. The angled neck also reduces the chance of accidental spills and permits "dribble-free" pouring.

When the vented screw cap is tightened to the end position, the closed tissue culture flask is liquid and gas tight. By simply unscrewing the cap one quarter of a turn, the flask is in the "VENT" position, with the inside of the flask being aerated through a defined gap opening. This guarantees that the gas exchange with the environment and the possible risk of contamination are kept to a minimum. In addition, the special flat thread profile of the caps stops excess tightening and thus allows the caps to be re-used multiple times.

The TPP filter cap has a welded membrane in the cap cavity to offer free gas exchange without gas flow alteration. For optimal flask breathing, all membranes are proportionally dimensioned to each cap size. The microporous hydrophobic membrane (cytotoxic free) itself is constructed of 2 layers of membrane material based on a white acrylic copolymer over nylon support. With an airflow rate of 4.5 (LPM/3.7cm2/13.5psi), the gas exchange properties of the filtered flasks are comparable to that of the standard cap flasks.

Legal Information

TPP is a registered trademark of TPP Techno Plastic Products AG

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Customers Also Viewed

Slide 1 of 5

1 of 5

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service