Skip to Content
MilliporeSigma
  • Determination of nitroimidazole residues in aquaculture tissue using ultra high performance liquid chromatography coupled to tandem mass spectrometry.

Determination of nitroimidazole residues in aquaculture tissue using ultra high performance liquid chromatography coupled to tandem mass spectrometry.

Journal of chromatography. B, Analytical technologies in the biomedical and life sciences (2014-05-06)
Anna Gadaj, Valentina di Lullo, Helen Cantwell, Martin McCormack, Ambrose Furey, Martin Danaher
ABSTRACT

An UHPLC-MS/MS method was developed for the quantitative confirmatory analysis of residues of nitroimidazole drugs (dimetridazole, ipronidazole, metronidazole, ornidazole and ronidazole) and their corresponding hydroxy metabolites (HMMNI, ipronidazile-OH and metronidazole-OH) in aquaculture tissue. Samples were extracted by shaking in acetonitrile, water, MgSO4 and NaCl before being defatted with n-hexane pre-saturated with acetonitrile and concentrated under nitrogen. Nitroimidazole residues were determined by UHPLC-MS/MS operating in positive electrospray ionisation mode using a reversed phase BEH C18 column. The method was validated according to the EU Commission Decision 2002/657/EC guidelines. The following performance studies were carried out: specificity, selectivity, linearity, within laboratory repeatability (WLr)/reproducibility (WLR), accuracy, precision, decision limit (CCα), detection capability (CCβ), absolute recovery and stability. The analytical range of the method is 0.1-20 μg kg(-1). Accuracy and precision of the method, under within-laboratory reproducibility conditions, ranged from 83 to 105% and 2.3 to 14.0%, respectively. CCα were 0.07-1.0 μg kg(-1) depending on analyte and matrix. A total of 50 samples can be analysed in a single day using the assay. The method has been extensively evaluated through application to real test samples.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methanol, suitable for HPLC
Sigma-Aldrich
Methanol, SAJ special grade
Sigma-Aldrich
Sodium chloride solution, 0.1 M
Sigma-Aldrich
Methanol, SAJ first grade, ≥99.5%
Sigma-Aldrich
Methanol, JIS 300, ≥99.8%, for residue analysis
Sigma-Aldrich
Methanol, JIS special grade, ≥99.8%
Sigma-Aldrich
Metronidazole, SAJ first grade, ≥99.0%
Sigma-Aldrich
Sodium chloride solution, 0.85%
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (v/v) trifluoroacetic acid
Supelco
Dimetridazole, VETRANAL®, analytical standard
Sigma-Aldrich
Acetonitrile solution, contains 0.1 % (v/v) trifluoroacetic acid, suitable for HPLC
Sigma-Aldrich
Sodium chloride, tested according to Ph. Eur.
Sigma-Aldrich
Acetonitrile solution, contains 0.05 % (w/v) ammonium formate, 5 % (v/v) water, 0.1 % (v/v) formic acid, suitable for HPLC
Sigma-Aldrich
Methanol, NMR reference standard
Supelco
Metronidazole, Pharmaceutical Secondary Standard; Certified Reference Material
Sigma-Aldrich
Sodium chloride, BioUltra, for molecular biology, ≥99.5% (AT)
Supelco
Metronidazole, VETRANAL®, analytical standard
Supelco
Methanol, analytical standard
SAFC
Sodium chloride solution, 5 M
Sigma-Aldrich
Methanol, HPLC Plus, ≥99.9%, poly-coated bottles
Sigma-Aldrich
Sodium chloride, BioPerformance Certified, ≥99% (titration), suitable for insect cell culture, suitable for plant cell culture
Sigma-Aldrich
Sodium chloride, JIS special grade, ≥99.5%
Sigma-Aldrich
Sodium chloride solution, 1 M
Sigma-Aldrich
Sodium chloride, SAJ first grade, ≥99.0%
Sigma-Aldrich
Acetonitrile solution, contains 10.0% acetone, 0.05% formic acid, 40.0% 2-propanol
Sigma-Aldrich
Sodium chloride, BioXtra, ≥99.5% (AT)
Sigma-Aldrich
Sodium chloride, for molecular biology, DNase, RNase, and protease, none detected, ≥99% (titration)
Sigma-Aldrich
Sodium chloride, BioReagent, suitable for cell culture, suitable for insect cell culture, suitable for plant cell culture, ≥99%
Sigma-Aldrich
Sodium chloride solution, 0.9% in water, BioXtra, suitable for cell culture
Sigma-Aldrich
Sodium chloride, meets analytical specification of Ph. Eur., BP, USP, 99.0-100.5%