Skip to Content
MilliporeSigma
  • Highly charged cellulose-based nanocrystals as flocculants for harvesting Chlorella vulgaris.

Highly charged cellulose-based nanocrystals as flocculants for harvesting Chlorella vulgaris.

Bioresource technology (2015-07-27)
Dries Vandamme, Samuel Eyley, Guy Van den Mooter, Koenraad Muylaert, Wim Thielemans
ABSTRACT

This study presents a novel flocculant for harvesting Chlorella vulgaris as model species for freshwater microalgae based on cellulose nanocrystals (CNCs), thus synthesized from a renewable and biodegradable resource. Cationic pyridinium groups were grafted onto CNCs by two separate one-pot simultaneous esterification and nucleophilic substitution reactions. Both types of modified CNCs were positively charged in the pH range 4-11. Both reactions yielded CNCs with a high degree of substitution (up to 0.38). A maximum flocculation efficiency of 100% was achieved at a dosage of 0.1 g g(-1) biomass. In contrast to conventional polymer flocculants, cationic CNCs were relatively insensitive to inhibition of flocculation by algal organic matter. The present results highlight the potential of these new type of nanocellulose-based flocculants for microalgae harvesting.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Ethanol, JIS first grade, 94.8-95.8%
Sigma-Aldrich
Sulfuric acid, SAJ first grade, ≥95.0%
Sigma-Aldrich
Sulfuric acid solution, 0.1 M
Sigma-Aldrich
Sulfuric acid solution, 0.05 M
Sigma-Aldrich
Sulfuric acid solution, 5 mM
Sigma-Aldrich
Sulfuric acid solution, 0.025 M
Sigma-Aldrich
Sulfuric acid solution, 0.5 M
Sigma-Aldrich
Sulfuric acid, 99.999%
Sigma-Aldrich
Ethanol Fixative 80% v/v, suitable for fixing solution (blood films)
Sigma-Aldrich
Sulfuric acid solution, 0.25 M
Sigma-Aldrich
Sulfuric acid solution, 1.5 M
Sigma-Aldrich
Sulfuric acid, JIS special grade, ≥95.0%
Sigma-Aldrich
Ethanol, JIS special grade, 94.8-95.8%
Sigma-Aldrich
Sulfuric acid solution, 0.01 M
Sigma-Aldrich
Ethanol, ≥99.5%
Sigma-Aldrich
Pyridine, JIS special grade, ≥99.5%
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for fluorescence
Sigma-Aldrich
Ethanol, JIS 1000, ≥99.5%, for residue analysis
Sigma-Aldrich
Ethanol, JIS 300, ≥99.5%, for residue analysis
Supelco
Dichloromethane solution, contains 10 % (v/v) methanol
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for absorption spectrum analysis
Sigma-Aldrich
Ethanol, ≥99.5%, suitable for HPLC
Sigma-Aldrich
Dichloromethane, JIS special grade, ≥99.0%
Sigma-Aldrich
Dichloromethane, SAJ first grade, ≥99.0%
Sigma-Aldrich
Dichloromethane, suitable for HPLC, ≥99.9%, contains 40-150 ppm amylene as stabilizer
Sigma-Aldrich
Pyridine, ≥99%
Sigma-Aldrich
p-Toluenesulfonyl chloride, reagent grade, ≥98%
Supelco
Dichloromethane, ≥99.9%
Sigma-Aldrich
Ethyl alcohol, Pure, 200 proof, anhydrous, ≥99.5%
Sigma-Aldrich
Dichloromethane, anhydrous, ≥99.8%, contains 40-150 ppm amylene as stabilizer