콘텐츠로 건너뛰기
Merck
모든 사진(1)

주요 문서

모든 문서 보기

634875

Sigma-Aldrich

Aluminum oxide

single crystal substrate, <0001>

동의어(들):

Sapphire, Alumina

로그인조직 및 계약 가격 보기
모든 사진(1)

About This Item

Linear Formula:
Al2O3
CAS Number:
1344-28-1
Molecular Weight:
101.96
EC Number:
215-691-6
MDL number:
MFCD00003424
UNSPSC 코드:
12352303
eCl@ss:
38120402
PubChem Substance ID:
24882698
NACRES:
NA.23

설명

Crystallographic D spacing ((0001) - c plane: 2.165 Angstrom)
Crystallographic D spacing ((1011) - s plane: 1.961 Angstrom)
Crystallographic D spacing ((1040) - m plane: 1.375 Angstrom)
Crystallographic D spacing ((1102) - r plane: 1.740 Angstrom)
Crystallographic D spacing ((1120) - a plane: 2.379 Angstrom)
Crystallographic D spacing ((1123) - n plane: 1.147 Angstrom)
single side polished

Quality Level

100

양식

single crystal substrate

경도

9 mohs

길이 × 너비 × 두께

10 mm × 10 mm × 0.5 mm

mp

2040 °C (lit.)

반도체 특성

<0001>

SMILES string

O=[Al]O[Al]=O

InChI

1S/2Al.3O

InChI key

TWNQGVIAIRXVLR-UHFFFAOYSA-N

유사한 제품을 찾으십니까? 방문 제품 비교 안내

특징 및 장점

Common substrate for III-V nitrides as well as many other epitaxial films.

물리적 특성

thermal expansion = 7.5 × 10-6 /°C; specific heat = 0.10 cal/°C; thermal conductivity = 46.06 @ 0 °C, 25.12 @ 100 °C, 12.56 @ 400 °C (W/m,K); dielectric constant = ~9.4 @ 300 K at A axis, ~11.58 @ C axis; loss tangent at 10 GHz < 2 × 10-5 at A axis, 5 × 10-6 at C axis

물리적 형태

Crystalline, hexagonal (a = 4.758 Å, c = 12.992)

Storage Class Code

13 - Non Combustible Solids

WGK

nwg

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable

개인 보호 장비

Eyeshields, Gloves, type N95 (US)

가장 최신 버전 중 하나를 선택하세요:

시험 성적서(COA)

Lot/Batch Number
MKCT7636
MKCS8038
MKCS3960
MKCR7006
MKCQ9033

적합한 버전을 찾을 수 없으신가요?

특정 버전이 필요한 경우 로트 번호나 배치 번호로 특정 인증서를 찾을 수 있습니다.

COA 검색

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

G Siddiqi et al.
Dalton transactions (Cambridge, England : 2003), 44(32), 14349-14353 (2015-07-23)
A simple one-step and gram-scale synthesis of [Au5Mes5] from AuCl3 was developed, and this molecular precursor was used to generate Au nanoparticles on SiO2 and Al2O3. While [Au5Mes5] does not react with surface silanols and is only physisorbed, its incipient
Chien-Chih Lin et al.
Nanoscale, 5(17), 8090-8097 (2013-07-25)
We demonstrated a promising route for enhancing temperature sensitivity, improving saturation voltage, and reducing power consumption of the MOS(p) tunneling temperature sensors by introducing ultrathin Al2O3 into the dielectric stacks. Detailed illustrations of the working mechanism and device concept are
Colin J Ingham et al.
Biotechnology advances, 30(5), 1089-1099 (2011-08-23)
Porous aluminum oxide (PAO) is a ceramic formed by an anodization process of pure aluminum that enables the controllable assembly of exceptionally dense and regular nanopores in a planar membrane. As a consequence, PAO has a high porosity, nanopores with
Joohoon Kang et al.
ACS nano, 9(4), 3596-3604 (2015-03-19)
Solution dispersions of two-dimensional (2D) black phosphorus (BP)--often referred to as phosphorene--are achieved by solvent exfoliation. These pristine, electronic-grade BP dispersions are produced with anhydrous organic solvents in a sealed-tip ultrasonication system, which circumvents BP degradation that would otherwise occur
Do Won Hwang et al.
EJNMMI research, 4(1), 61-61 (2015-06-28)
Three-dimensional (3D) hydrogel-based stem cell therapies contribute to enhanced therapeutic efficacy in treating diseases, and determining the optimal mechanical strength of the hydrogel in vivo is important for therapeutic success. We evaluated the proliferation of human neural stem cells incorporated
모든 관련된 서류 보기

문서

Dye-Sensitized and Perovskite Solar Cells

Continuous efficiency improvements in photovoltaic devices result from material advancements and manufacturing innovation.

Progress in Spintronic Materials

Spintronics offer breakthroughs over conventional memory/logic devices with lower power, leakage, saturation, and complexity.

Synthesis of Melting Gels Using Mono-Substituted and Di-Substituted Alkoxysiloxanes

Hybrid organic-inorganic sol-gel materials containing silica were first called “ORMOSILs” in 1984.

Atomic Layer Deposition of Nanomaterials for Li-Ion Batteries, Fuel Cells, and Solar Cells

Nanomaterials are considered a route to the innovations required for large-scale implementation of renewable energy technologies in society to make our life sustainable.

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.