콘텐츠로 건너뛰기
Merck
모든 사진(2)

주요 문서

739332

Sigma-Aldrich

PEDOT:PSS

greener alternative

high-conductivity grade, 1.1% aqueous dispersion, surfactant-free

동의어(들):

Orgacon ICP 1050, PEDOT:PSS, Poly(2,3-dihydrothieno-1,4-dioxin)-poly(styrenesulfonate)

로그인조직 및 계약 가격 보기


About This Item

MDL number:
UNSPSC 코드:
12352103
NACRES:
NA.23

제품명

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), 1.1% in H2O, surfactant-free, high-conductivity grade

Grade

high-conductivity grade

Quality Level

양식

liquid

환경친화적 대안 제품 특성

Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.

sustainability

Greener Alternative Product

농도

1.1% in H2O

저항성

<100 Ω/sq, <80% visible light transmission (40μm wet)

refractive index

n20/D 1.334

pH

<2.5

점도

30-100 cP(20 °C)

density

0.999 g/mL at 25 °C

환경친화적 대안 카테고리

저장 온도

2-8°C

유사한 제품을 찾으십니까? 방문 제품 비교 안내

일반 설명

Aqueous surfactant-free dispersion of high conductivity grade PEDOT:PSS polymer. Optimal performance in transparent conductive coatings may require addition of formulation ingredients (e.g. surfactants and high-boiling solvents).Conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer without a high boiling solvent (HBS), that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it a viable polymer in organic electronics.
We are committed to bringing you Greener Alternative Products, which adhere to one or more of the 12 Principles of Green Chemistry. This product is used in energy conversion and storage, thus has been enhanced for energy efficiency. Click here for more information.

애플리케이션

PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), perovskite solar cells (DSSCs), organic light emitting diodes (OLEDs) and other biomedical sensors.
Used to prepare highly transparent conductive coating formulations. Primary and secondary nucleation by introducing PEDOT:PSS in a hydrogel was studied.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.

법적 정보

Product of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.

픽토그램

Corrosion

신호어

Danger

유해 및 위험 성명서

Hazard Classifications

Eye Dam. 1 - Skin Corr. 1B

Storage Class Code

8B - Non-combustible corrosive hazardous materials

WGK

WGK 3

Flash Point (°F)

Not applicable

Flash Point (°C)

Not applicable


가장 최신 버전 중 하나를 선택하세요:

시험 성적서(COA)

Lot/Batch Number

적합한 버전을 찾을 수 없으신가요?

특정 버전이 필요한 경우 로트 번호나 배치 번호로 특정 인증서를 찾을 수 있습니다.

이 제품을 이미 가지고 계십니까?

문서 라이브러리에서 최근에 구매한 제품에 대한 문서를 찾아보세요.

문서 라이브러리 방문

Hybrid photovoltaic devices from regioregular polythiophene and ZnO nanoparticles composites
Das NC and Sokol PE
Renewable Energy, 35(12), 2683-2688 (2010)
Harkema, S. et al.
Proc. SPIE: Int. Soc. Opt. Eng., 7415, 74150T-741501 (2009)
Mechanically tunable conductive interpenetrating network hydrogels that mimic the elastic moduli of biological tissue
Feig VR, et al.
Nature Communications, 9(1), 2740-2740 (2018)
High-resolution electrohydrodynamic jet printing of small-molecule organic light-emitting diodes
Kim K, et al.
Nanoscale, 7(32), 13410-13415 (2015)
Explaining the effects of processing on the electrical properties of PEDOT: PSS
Van Reenen S, et al.
Organic Electronics, 15(12), 3710-3714 (2014)

문서

A detailed article on conducting polymer materials for flexible organic photovoltaics (OPVs) applications.

In the field of organic printable electronics, such as OLEDs and organic photovoltaics (OPVs), improved organic conducting and semiconducting materials are needed. The progress in two fields is reviewed in this article.

Conducting polymers such as polyaniline, polythiophene and polyfluorenes are now much in the spotlight for their applications in organic electronics and optoelectronics.

Advancements in bioelectronics, incorporating self-healing materials for wearable devices, and measuring bioelectric signals to assess physiological parameters.

모두 보기

자사의 과학자팀은 생명 과학, 재료 과학, 화학 합성, 크로마토그래피, 분석 및 기타 많은 영역을 포함한 모든 과학 분야에 경험이 있습니다..

고객지원팀으로 연락바랍니다.