SLCR033

Millex^™ hydrophilic PTFE syringe filter

pore size 0.45 μm, diam. 33 mm, non-sterile

• 동의어(들): 0.45 μm PTFE syringe filter, Millex-LCR syringe filter, disposable syringe filter, syringe filter
• UNSPSC 코드: 41104922
• eCl@ss: 32031690
• NACRES: NB.24

속성

• material: PTFE membrane; polypropylene housing
• 무균: non-sterile
• 제품 라인: Millex^™
• 특징: holdup volume≤ 80 μL (after air purge); hydrophilic
• 제조업체/상표: Millex^™
• 파라미터: 45 °C max. temp.; 8.6 bar max. inlet pressure (125 psi)
• 기술: HPLC: suitable; UV/Vis spectroscopy: suitable; analytical sample preparation: suitable
• 높이: 27 mm
• 직경: 33 mm
• 여과 면적: 4.5 cm²
• 용적: 100 mL
• 색상: light blue
• 공극 크기: 0.45 μm
• 입력: sample type aqueous solution(s); sample type organic solution(s)
• 버블 포인트(bubble point): ≥1.6 bar, air with water at 23 °C
• 피팅: female Luer-Lok^® inlet; male Luer outlet slip

설명

일반 설명

Filter Code: LCR
HPLC is certified for low levels of UV-absorbing extractable
SLCR033NS replaces SLCR025NS
SLCR033NB replaces SLCR025NB
SLCR033NK replaces SLCR025NK

MILLEX^™ LCR Syringe Filter is a nonsterile, HPLC-certified syringe filter that contains an 0.20µm hydrophilic PTFE (polytetrafluoroethylene) membrane. This syringe filter is recommended for filtering 10-100 milliliter (mL) volumes to remove particles prior to instrumentation analysis. The single-use disposable filter removes particles larger than the membrane′s rated pore size.

특징 및 장점

• HPLC-certified for low levels of UV-absorbing extractables
• Hydrophilic PTFE membranes exhibit low analyte binding and broad solvent compatibility, enabling the filtration of aqueous and organic solvents
• Polypropylene housing material provides low levels of extractable and broad chemical compatibility
• Recommended sample volume: 10-100mL
• Light blue band for easy identification

규격

For general laboratory use only

법적 정보

Luer-Lok is a registered trademark of Becton-Dickinson & Co.

Millex is a trademark of Merck KGaA, Darmstadt, Germany