MilliporeSigma
All Photos(1)

Documents

1.11107

Supelco

Oxygen Test

titrimetric, for use with MQUANT® titration pipette

Sign Into View Organizational & Contract Pricing

analyte chemical class(es)

oxygenates

Quality Level

compatibility

for use with MQUANT® titration pipette

detection method

titrimetric

storage temp.

15-25°C

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
1.146941.187551.18758
Oxygen Test titrimetric, for use with MQUANT® titration pipette

1.11107

Oxygen Test

Oxygen Cell Test photometric, 0.5-12.0 mg/L (O2), Spectroquant®

1.14694

Oxygen Cell Test

Ozone Test colorimetric, 0.007-0.20 mg/L (O3), for use with MCOLORTEST®

1.18755

Ozone Test

Ozone Test colorimetric, 0.15-10 mg/L (O3), for use with MCOLORTEST®

1.18758

Ozone Test

analyte chemical class(es)

oxygenates

analyte chemical class(es)

-

analyte chemical class(es)

-

analyte chemical class(es)

-

microbialanalysis
microbialanalysis

microbialanalysis
microbialanalysis

microbialanalysis
microbialanalysis

microbialanalysis
microbialanalysis

compatibility

for use with MQUANT® titration pipette

compatibility

for use with Spectroquant® Move 100, for use with Spectroquant® Nova 60 A, for use with Spectroquant® Prove 100, for use with Spectroquant® Prove 300, for use with Spectroquant® Prove 600

compatibility

for use with MCOLORTEST®

compatibility

for use with MCOLORTEST®

storage temp.

15-25°C

storage temp.

15-25°C

storage temp.

15-25°C

storage temp.

15-25°C

Quality Level

100

Quality Level

100

Quality Level

100

Quality Level

100

General description

Method: titrimetric, acc. to Winkler, with titration pipette MQuant®
The sustainability of biological processes in natural waters is essentially depended on a sufficient oxygen content. The oxygen present in water is also consumed by chemical processes and by microorganisms. This MQuant® Oxygen test (formally MColortest®) is suitable for the titrimetric determination using a graduated syringe.
It can be used in:
  • Groundwater, drinking water, and surface water, seawater
  • Aquarium water, waters from aquaculture
  • Industrial water and wastewater
  • Boiler water and boiler feed water
  • Beverages


Method
In alkaline solution, dissolved oxygen oxidizes manganese(II) ions to form manganese(IV) hydroxides (“oxygen fixation”). In strongly acidic solution these yield manganese(III) ions, which in turn oxidize iodide ions to form iodine. This is then titrated with sodium thiosulfate solution against starch as the indicator until the solution becomes entirely colorless. The oxygen concentration is determined from the consumption of titration solution (iodometric determination acc. to Winkler). The oxygen consumption is calculated as the difference between the oxygen content measured immediately after sampling and that measured after n days (n = 2 to 5).

Legal Information

MCOLORTEST is a registered trademark of Merck KGaA, Darmstadt, Germany
MQUANT is a registered trademark of Merck KGaA, Darmstadt, Germany

signalword

Danger

Hazard Classifications

Acute Tox. 4 Oral - Aquatic Chronic 3 - Eye Dam. 1 - Met. Corr. 1 - Skin Corr. 1A - STOT RE 2 - STOT RE 2 Oral

target_organs

Brain, Thyroid

Storage Class

8B - Non-combustible, corrosive hazardous materials

wgk_germany

WGK 3

flash_point_f

Not applicable

flash_point_c

Not applicable


Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service