MilliporeSigma
All Photos(1)

Documents

821873

TSKgel® G3000PWXL-CP HPLC Column

phase hydroxylated methacrylate, L × I.D. 30 cm × 7.8 mm, 7 μm particle size

Sign Into View Organizational & Contract Pricing

Select a Size

Synonym(s):
TSKgel® Size Exclusion (PW-Type) HPLC Column
eCl@ss:
32110501

material

stainless steel hardware

Agency

suitable for USP L37
suitable for USP L38
suitable for USP L39

product line

TSKgel®

manufacturer/tradename

Tosoh 21873

parameter

≤0.5 M salt concentration
≤20% organic solvent
1 mL/min flow rate
55 bar max. pressure
60 °C temperature

technique(s)

HPLC: suitable

L × I.D.

30 cm × 7.8 mm

matrix

polymer particle platform

matrix active group

hydroxylated methacrylate phase

particle size

7 μm

pore size

200 Å pore diameter

operating pH

2-12

separation technique

size exclusion (SEC)

Compare Similar Items

View Full Comparison

Show Differences

1 of 4

This Item
821875821874805106
vibrant-m

821873

TSKgel® G3000PWXL-CP HPLC Column

vibrant-m

821875

TSKgel® G6000PWXL-CP HPLC Column

vibrant-m

821874

TSKgel® G5000PWXL-CP HPLC Column

vibrant-m

805106

TSKgel® G3000PW HPLC Column

agency

suitable for USP L37, suitable for USP L38, suitable for USP L39

agency

suitable for USP L38, suitable for USP L39

agency

suitable for USP L38, suitable for USP L39

agency

suitable for USP L37, suitable for USP L38, suitable for USP L39

product line

TSKgel®

product line

TSKgel®

product line

TSKgel®

product line

TSKgel®

technique(s)

HPLC: suitable

technique(s)

HPLC: suitable

technique(s)

HPLC: suitable

technique(s)

HPLC: suitable

matrix

polymer particle platform

matrix

polymer particle platform

matrix

polymer particle platform

matrix

polymer particle platform

matrix active group

hydroxylated methacrylate phase

matrix active group

hydroxylated methacrylate phase

matrix active group

hydroxylated methacrylate phase

matrix active group

hydroxylated methacrylate phase

General description

TSKgel PWXL-CP columns were specifically developed for the analysis of water-soluble cationic polymers. Composed of polymethacrylate beads, cationic groups are introduced on the surface of the TSKgel PWXL-CP packing material to prevent adsorption of cationic polymers and allow elution under low salt conditions. These columns show high theoretical plate numbers, linear calibration curves and high durability because the base resin is the same as that used in the TSKgel PWXL series columns. Three columns are available within the TSKgel PWXL-CP series, each with a different particle size, separation range and exclusion limit, allowing polymers within a wide molecular mass range to be separated and characterized.

Application

Exclusion limit (Da): 100,000
Separation range (Da) (PEO,PEG): 200~50,000

Physical form

Shipped in water.

Recommended products

Discover LiChropur reagents ideal for HPLC or LC-MS analysis

Legal Information

TSKgel is a registered trademark of Tosoh Corporation

Certificates of Analysis (COA)

Search for Certificates of Analysis (COA) by entering the products Lot/Batch Number. Lot and Batch Numbers can be found on a product’s label following the words ‘Lot’ or ‘Batch’.

Already Own This Product?

Documents related to the products that you have purchased in the past have been gathered in the Document Library for your convenience.

Visit the Document Library

Difficulty Finding Your Product Or Lot/Batch Number?

Product numbers are combined with Pack Sizes/Quantity when displayed on the website (example: T1503-25G). Please make sure you enter ONLY the product number in the Product Number field (example: T1503).

Example:

T1503
Product Number
-
25G
Pack Size/Quantity

Additional examples:

705578-5MG-PW

PL860-CGA/SHF-1EA

MMYOMAG-74K-13

1000309185

enter as 1.000309185)

Having trouble? Feel free to contact Technical Service for assistance.

Lot and Batch Numbers can be found on a product's label following the words 'Lot' or 'Batch'.

Aldrich Products

  • For a lot number such as TO09019TO, enter it as 09019TO (without the first two letters 'TO').

  • For a lot number with a filling-code such as 05427ES-021, enter it as 05427ES (without the filling-code '-021').

  • For a lot number with a filling-code such as STBB0728K9, enter it as STBB0728 without the filling-code 'K9'.

Not Finding What You Are Looking For?

In some cases, a COA may not be available online. If your search was unable to find the COA you can request one.

Request COA

Protocols

HPLC Analysis of Various Cationic Polymers on TSKgel® PWXL-CP Columns

Separation of Polyacrylic acid (PAA) 438 kDa; Polyacrylic acid (PAA) 235 kDa; Polyethylenimine (PEI) 266 kDa ; Poly(dimethyl diallyl ammonium chloride) (PIDADMACl) 204 kDa; p-Aminosalicylic acid (PAS) 7800 Da; p-Aminosalicylic acid (PAS) 257 kDa; Cationic dextran (11 kDa); Chitosan (13.4 kDa)

Our team of scientists has experience in all areas of research including Life Science, Material Science, Chemical Synthesis, Chromatography, Analytical and many others.

Contact Technical Service