MilliporeSigma
  • Optimization of supercritical fluid consecutive extractions of fatty acids and polyphenols from Vitis vinifera grape wastes.

Optimization of supercritical fluid consecutive extractions of fatty acids and polyphenols from Vitis vinifera grape wastes.

Journal of food science (2014-12-05)
Oier Aizpurua-Olaizola, Markel Ormazabal, Asier Vallejo, Maitane Olivares, Patricia Navarro, Nestor Etxebarria, Aresatz Usobiaga
ABSTRACT

In this study, supercritical fluid extraction has been successfully applied to a sequential fractionation of fatty acids and polyphenols from wine wastes (2 different vitis vinifera grapes). To this aim, in a 1st step just fatty acids were extracted and in a 2nd one the polyphenols. The variables that affected to the extraction efficiency were separately optimized in both steps following an experimental design approach. The effect of extraction temperature flow, pressure, and time were thoroughly evaluated for the extraction of fatty acids, whereas the addition of methanol was also considered in the case of the polyphenols extraction. A quantitative extraction with high efficiency was achieved at a very short time and low temperatures. Concerning quantification, fatty acids were determined by means of gas chromatography coupled to mass spectrometry after a derivatization step, whereas the polyphenols were analyzed by means of high performance liquid chromatography coupled to tandem mass spectrometry and the Folin-Ciocalteu method.

MATERIALS
Product Number
Brand
Product Description

Sigma-Aldrich
Methyl palmitoleate, ≥99% (capillary GC), liquid
Sigma-Aldrich
Methyl palmitate, ≥99% (capillary GC)
Sigma-Aldrich
Methyl myristoleate, ≥98.5% (capillary GC), liquid
Sigma-Aldrich
Methyl tridecanoate, ≥97% (GC)
Sigma-Aldrich
Methyl arachidate, ≥99% (capillary GC)
Sigma-Aldrich
Methyl stearate, ~99% (GC)
Sigma-Aldrich
Methyl myristate, ≥99% (GC)
Sigma-Aldrich
Methyl elaidate, ≥99% (capillary GC)
Supelco
Methyl tridecanoate, analytical standard
Supelco
2,2,4-Trimethylpentane, analytical standard
Sigma-Aldrich
Sodium hydroxide, BioUltra, for luminescence, ≥98.0% (T), pellets
Supelco
Methyl elaidate, analytical standard
Supelco
Methyl decanoate, analytical standard
Supelco
Methyl myristoleate, analytical standard
Supelco
Methyl linoleate, analytical standard
Supelco
Methyl palmitate, analytical standard
Supelco
Sulfuric acid, for the determination of nitrogen, ≥97.0%
Supelco
Methyl palmitoleate, analytical standard
Supelco
Methyl stearate, analytical standard
Supelco
Methyl arachidate, analytical standard
Supelco
Methyl myristate, analytical standard
Supelco
Sulfuric acid concentrate, 0.1 M H2SO4 in water (0.2N), eluent concentrate for IC
Sigma-Aldrich
Formic acid, ≥95%, FCC, FG
Sigma-Aldrich
Methyl myristate, ≥98%, FG
Sigma-Aldrich
Methyl palmitate, ≥97%
Sigma-Aldrich
3-Ethyl-2,4-pentanedione, mixture of tautomers, 98%
Sigma-Aldrich
Sulfuric acid, 99.999%
Sigma-Aldrich
Methyl decanoate, ≥99%, FG
Supelco
Methyl stearate, certified reference material, TraceCERT®, Manufactured by: Sigma-Aldrich Production GmbH, Switzerland
Sigma-Aldrich
Methyl decanoate, 99%