コンテンツへスキップ
Merck
  • Self-cleaning and mechanical properties of modified white cement with nanostructured TiO2.

Self-cleaning and mechanical properties of modified white cement with nanostructured TiO2.

Journal of nanoscience and nanotechnology (2013-08-02)
R Khataee, V Heydari, L Moradkhannejhad, M Safarpour, S W Joo
要旨

In the present study, self-cleaning and mechanical properties of white Portland cement by addition of commercial available TiO2 nanoparticles with the average particle size of 80 nm were investigated. X-ray diffraction (XRD), transmission electron microscopy (TEM) and BET were used to characterize TiO2 nanoparticles. For determination of self-cleaning properties of TiO2-modified white cement, colorimetric tests in decolorization of C.I. Basic Red 46 (BR46) in comparison to unmodified cement samples was applied. The results indicated that with increasing the amount of TiO2 nanoparticles in modified cement, self-cleaning property of the samples increased. The mechanical properties of TiO2-modified and unmodified cement samples, such as time of setting of hydraulic cement, compressive strength of hydraulic cement mortar and flexural strength of hydraulic cement mortar were examined. The results indicated that addition of TiO2 nanoparticles up to maximum replacement level of 1.0% improved compressive and flexural strength and decreased its setting time.

材料
製品番号
ブランド
製品内容

Sigma-Aldrich
酸化チタン(IV), nanopowder, 21 nm primary particle size (TEM), ≥99.5% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、アナターゼ, nanopowder, <25 nm particle size, 99.7% trace metals basis
Sigma-Aldrich
酸化チタン(IV), puriss., meets analytical specification of Ph. Eur., BP, USP, 99-100.5%
Sigma-Aldrich
酸化チタン(IV)、アナターゼ, powder, 99.8% trace metals basis
Sigma-Aldrich
酸化チタン(IV), ReagentPlus®, ≥99%
Sigma-Aldrich
酸化チタン(IV)、ルチル, powder, <5 μm, ≥99.9% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、アナターゼ, powder, −325 mesh, ≥99% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、ルチル, nanopowder, <100 nm particle size, 99.5% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、ルチル型/アナターゼ型混合物, nanopowder, <100 nm particle size (BET), 99.5% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.127 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, powder, <45 μm avg. part. size, 99.98% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、ルチル型/アナターゼ型混合物, nanoparticles, <150 nm particle size (volume distribution, DLS), dispersion, 40 wt. % in H2O, 99.5% trace metals basis
Sigma-Aldrich
チタン, powder, −100 mesh, 99.7% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、ルチル, ≥99.98% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、ルチル, 99.995% trace metals basis
Sigma-Aldrich
酸化チタン(IV), contains 1% Mn as dopant, nanopowder, <100 nm particle size (BET), ≥97%
Sigma-Aldrich
チタン, sponge, 1-20 mm, 99.5% trace metals basis
Sigma-Aldrich
チタン, wire, diam. 0.25 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 2.0 mm, 99.7% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.025 mm, 99.98% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, sputtering target, diam. × thickness 2.00 in. × 0.25 in., 99.995% trace metals basis
Sigma-Aldrich
チタン, foil, thickness 0.127 mm, ≥99.99% trace metals basis
Sigma-Aldrich
酸化チタン(IV)、ルチル, <001>, (single crystal substrate), ≥99.9% trace metals basis, L × W × thickness 10 mm × 10 mm × 0.5 mm
Sigma-Aldrich
チタン, foil, thickness 0.25 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, wire, diam. 1.0 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, 5-10 mm, ≥99.99% trace metals basis (purity exclusive of Na and K content)
Sigma-Aldrich
チタン, wire, diam. 0.5 mm, 99.99% trace metals basis
Sigma-Aldrich
チタン, evaporation slug, diam. × L 6.3 mm × 6.3 mm, ≥99.99% trace metals basis